random clutch issue.....

Need technical Q/A then you're in the right place

Moderator: martauto

e30-EVN
Old Skooler
Old Skooler
Posts: 3382
Joined: Sun Dec 13, 2009 11:00 pm
Location: S.Wales

Post Thu Oct 27, 2011 1:04 pm

Further to convo's had before about my luk clutch being shite in my m52 I have a question......

The other day I was driving along and the clutch was slipping! 60mph in 5th, put my foot down and slipping like a bugger. Couldn't get NO power down at all and figured I needed a new clutch, so preparing myself for the whole engine and box out scenario that goes with the teritory of a 24v'd e30.......

Went out yesterday in her and my GOD! No slip.... Nothing!! Just went like a scalded cat and hasn't slipped since!

Could this be a faulty slave cylinder? Sticking sometimes in the out possition thus giving the symptom of driving with your foot half on the clutch??

Its not done it since but the other day she was really bad

T I A 8)
A 2 door e30 with 8 cylinders, what could be better winkeye :D
e30-EVN
Old Skooler
Old Skooler
Posts: 3382
Joined: Sun Dec 13, 2009 11:00 pm
Location: S.Wales

Post Thu Oct 27, 2011 7:42 pm

Can any1 advise pls?
A 2 door e30 with 8 cylinders, what could be better winkeye :D
penton08
E30 Zone Camper
E30 Zone Camper
Posts: 1206
Joined: Sat May 10, 2008 11:00 pm

Post Thu Oct 27, 2011 9:37 pm

What gear box are you using?

M40/2 box= easy clutch swap.

M52/S50 box= Swearing.

The engine does not have to come out regardless of the type of box, but with the later it could be easier if you don't have a ramp and something to support the engine properly.
e30-EVN
Old Skooler
Old Skooler
Posts: 3382
Joined: Sun Dec 13, 2009 11:00 pm
Location: S.Wales

Post Thu Oct 27, 2011 11:08 pm

Thanks for the reply...... I have the m42 box but like the whole conversion, I'm using axle stands and jacks lol

I was thinking therefore it would be easier for me to rip it all out :mad:
A 2 door e30 with 8 cylinders, what could be better winkeye :D