Intermittent wiper setting not working

Need technical Q/A then you're in the right place

Moderator: martauto

cee
E30 Zone Regular
E30 Zone Regular
Posts: 983
Joined: Sun Aug 23, 2009 11:00 pm
Location: Plymouth

Post Wed Oct 19, 2011 1:53 am

As title. Any ideas?
Image
1990 Sterlingsilber 318iS - 146 bhp / 192 Nm
capri_rob
Married to the E30 Zone
Married to the E30 Zone
Posts: 9678
Joined: Tue Feb 19, 2008 11:00 pm
Location: South Staffordshire

Post Wed Oct 19, 2011 7:18 am

Most likely to be the wiper motor needing a refurb.

There is an article in the wiki which tells you how to do it step by step.
Image

e30topless said : Proper BMW's have 4 headlights, last of the run was the E30 and E34/E32 anything after that is just complete shite
DHFiS
Old Skooler
Old Skooler
Posts: 2733
Joined: Sat Aug 12, 2006 11:00 pm
Location: cambridge

Post Wed Oct 19, 2011 7:50 am

cee
E30 Zone Regular
E30 Zone Regular
Posts: 983
Joined: Sun Aug 23, 2009 11:00 pm
Location: Plymouth

Post Wed Oct 19, 2011 10:12 am

Yes all other settings work, and thanks, will check the article :)
Image
1990 Sterlingsilber 318iS - 146 bhp / 192 Nm
User avatar
greg124
E30 Zone Regular
E30 Zone Regular
Posts: 668
Joined: Tue Apr 03, 2007 11:00 pm
Location: In the pub

Post Wed Oct 19, 2011 10:41 am

I stripped, cleaned and rebuilt the wiper motors on both our cars, as per the article in the Wiki mentioned above. First one took about an hour, second rather less. Both now work perfectly.
Not difficult, and well worth doing IMO
Schadenfreude - the German's haven't got a word for that.
User avatar
Billwill
E30 Zone Regular
E30 Zone Regular
Posts: 363
Joined: Sun Jun 26, 2011 11:00 pm
Location: South Africa

Post Wed Oct 19, 2011 4:12 pm

If the other settings ie. slow and fast are working as stated and if the wipers return to the Park position as it should....then I do not believe that the problem is with the wiper motor/dirty motor contacts as that Wiki link proposes.
If it is purely the intermittant function that is not working then I believe that the problem is with the wiper switch or more likely with the wash/wipe interval control unit which is K10 in the power distribution box.
By all means do the Wiki wiper repair procedure first.....that area does suffer from bad contacts from all the grease and grime there...if that does not work then check K10 and the wiper switch. :)
cee
E30 Zone Regular
E30 Zone Regular
Posts: 983
Joined: Sun Aug 23, 2009 11:00 pm
Location: Plymouth

Post Wed Oct 19, 2011 8:15 pm

Oh, it doesn't automatically return
Image
1990 Sterlingsilber 318iS - 146 bhp / 192 Nm
User avatar
Billwill
E30 Zone Regular
E30 Zone Regular
Posts: 363
Joined: Sun Jun 26, 2011 11:00 pm
Location: South Africa

Post Thu Oct 20, 2011 11:02 am

cee wrote:Oh, it doesn't automatically return

OK then definitely do as advised and follow the Wiki link on how to clean up the wiper motor assembly.
If you have the later face-lift models...the procedure is a bit easier as the wiper motor lifts straight up and out :)
cee
E30 Zone Regular
E30 Zone Regular
Posts: 983
Joined: Sun Aug 23, 2009 11:00 pm
Location: Plymouth

Post Thu Oct 20, 2011 11:32 am

Sounds good, but confused as to the chances of both motors being faulty at the same time?
Image
1990 Sterlingsilber 318iS - 146 bhp / 192 Nm
User avatar
Billwill
E30 Zone Regular
E30 Zone Regular
Posts: 363
Joined: Sun Jun 26, 2011 11:00 pm
Location: South Africa

Post Thu Oct 20, 2011 12:35 pm

cee wrote:Sounds good, but confused as to the chances of both motors being faulty at the same time?

There is only one motor for the front....wipers are connected by a linkage. If you have a Touring then you would have a motor at the rear.
After you have cleaned up the motor and fitted it back in place...initially do not fit the actual wipers. Run the motor and let it return to its "park" position. Now fit the wipers in place...out of the way... and bolt them down.
cee
E30 Zone Regular
E30 Zone Regular
Posts: 983
Joined: Sun Aug 23, 2009 11:00 pm
Location: Plymouth

Post Thu Oct 20, 2011 12:38 pm

ahh I see, makes more sense now. Thanks
Image
1990 Sterlingsilber 318iS - 146 bhp / 192 Nm