Wheels

Need technical Q/A then you're in the right place

Moderator: martauto

User avatar
Asthenia
E30 Zone Newbie
E30 Zone Newbie
Posts: 99
Joined: Sat May 07, 2011 11:00 pm
Location: Hampshire

Post Tue Aug 16, 2011 8:08 pm

Yo, I'm looking at getting some decent wheels for my 316i

I'm just starting to understand wheel sizes, but for what I understand I need to be looking for 4x100 for stud and diameter.

I came along these alloys

http://www.ebay.co.uk/itm/15-DARE-RS-ST ... 588wt_1139


I think my bottlecap 14" ones are 7J and have an offset of 24mm,

these I noticed have an offset of 35mm and are still 7J, will these fit?

From what I've learnt 7J is the inch width between the outer flange to the inner flange or something like that and offset is the center of the rim to the mounting plate.
Grrrmachine
E30 Zone Wiki / Team Member
E30 Zone Wiki / Team Member
Posts: 8043
Joined: Sat Feb 09, 2008 11:00 pm
Location: Warsaw, Poland

Post Tue Aug 16, 2011 9:20 pm

If you're looking to spend that sort of money, just get some decent clean BBS. It's only a 316.

Dimension-wise though, offset should be between ET20 and ET35; I run ET12's with no issues though. 7j is the width, and with that offset it MIGHT cause rubbing, but nothing a 5mm spacer wouldn't fix.
User avatar
Asthenia
E30 Zone Newbie
E30 Zone Newbie
Posts: 99
Joined: Sat May 07, 2011 11:00 pm
Location: Hampshire

Post Wed Aug 17, 2011 12:11 am

Yeah I was thinking about that, good shout man.

I'm struggling to understand that if 7J is the width of the wheel, if the offset is changed from 25 to 35mm how does that not change the width in inches? maybe I'm confusing the matter.

So 7J ET20 - 30 is my aim?
User avatar
Asthenia
E30 Zone Newbie
E30 Zone Newbie
Posts: 99
Joined: Sat May 07, 2011 11:00 pm
Location: Hampshire

Post Wed Aug 17, 2011 12:28 am

Ignore what I just said, sort of understand now.
User avatar
Jozi
E30 Zone Addict
E30 Zone Addict
Posts: 3076
Joined: Thu Nov 22, 2007 11:00 pm
Location: Dublin, Ireland

Post Wed Aug 17, 2011 11:05 am

Those images in the ebay add are for different wheels! Look at the stud patern in relation to the spokes.

This:
Image

vs
Image
User avatar
chewy320
E30 Zone Regular
E30 Zone Regular
Posts: 253
Joined: Sun Mar 13, 2011 11:00 pm
Location: Surrey

Post Wed Aug 17, 2011 1:16 pm

I noticed the difference in the photos myself, looks a bit shady to me and if your getting reps you should look into other brands or similar styles. Ronal do a similar style wheel for about 500 and they look way better IMO. They are called ronal ls
User avatar
Jozi
E30 Zone Addict
E30 Zone Addict
Posts: 3076
Joined: Thu Nov 22, 2007 11:00 pm
Location: Dublin, Ireland

Post Wed Aug 17, 2011 1:20 pm

Calibre vintage also do a BBS rep wheel, someone on here has them on their E30 (Aliferrari?).
User avatar
charlieog1243
E30 Zone Newbie
E30 Zone Newbie
Posts: 157
Joined: Wed Jun 29, 2011 11:00 pm
Location: devon,england

Post Fri Aug 19, 2011 11:02 am

i have lenso bsx on my e30 9j at the rear and 7.5 at the front both fit perfect with good offset i have 9j rears for sale atm in mint condition :wink:
Bela
E30 Zone Newbie
E30 Zone Newbie
Posts: 157
Joined: Mon Jul 05, 2010 11:00 pm

Post Fri Aug 19, 2011 11:21 am

Guys, do 9j rears go on without mods to arches???