i currently have a set of wheels that the center bore is too small, i will obviously need this opening up to 72.1mm for the e30 fitment, does anyone have any experiance on this?
thanks rob
wheel center bore drilling
Moderator: martauto
-
leeparkes
- Married to the E30 Zone
- Posts: 9538
- Joined: Thu Jan 03, 2008 11:00 pm
- Location: Black country
E30 is 57.1mm
It can be done but the centre bore must be drilled dead centre.
It can be done but the centre bore must be drilled dead centre.
Cypriotgeeza wrote:I done both my mates in my old 318is
felt so proud,even tried it with a E30 325i and got put in my place..
i origonaly thort they was 57.1 but take a look at this.... ??
http://www.carlsalter.com/wheel_fitments.html
http://www.carlsalter.com/wheel_fitments.html
-
Grrrmachine
- E30 Zone Wiki / Team Member
- Posts: 8043
- Joined: Sat Feb 09, 2008 11:00 pm
- Location: Warsaw, Poland
Yes, and read the first line underneath the title of that page...
-
leeparkes
- Married to the E30 Zone
- Posts: 9538
- Joined: Thu Jan 03, 2008 11:00 pm
- Location: Black country
Trust me its 57.1mm.
That site has also got the offset wrong,states 15-20 when correct offset for a 7j rim is ET24
That site has also got the offset wrong,states 15-20 when correct offset for a 7j rim is ET24
Cypriotgeeza wrote:I done both my mates in my old 318is
felt so proud,even tried it with a E30 325i and got put in my place..
exelent