I had the cam belt done yesterday and a crypton tune up yesterday at place called BMTEC very sound guy and my car is running very well engine has got a clean bill of health its as quite as a mouse silky smoothI asked him to check a few things but like we all know there is not enough hours in the day.The problem is a whining/grinding noice when i am traveling at low speeds when i apply the brake it goes away and it is kinda loud not very nice when you are out possing lol.Any ideas please.
Cheers
Ryan
motorsport noice
Moderator: martauto
-
palerider325icab
- E30 Zone Regular

- Posts: 758
- Joined: Tue Jan 11, 2005 11:00 pm
- Location: NORTH WEST
-
Sjoerd320i
- E30 Zone Addict

- Posts: 4035
- Joined: Mon Jan 10, 2005 11:00 pm
- Location: Heemskerk, Holland
maybe a sticky brake pad/calliper?

-
slideways
- E30 Zone Newbie

- Posts: 108
- Joined: Mon May 30, 2005 11:00 pm
- Location: Sligo, EIRE
:yeahthat:
jack up your front wheels and spin them. check a stone hasn't got in between the disk and the dust plate at the back or that dust plate isn't bent. if you have a sticky caliper give it a few tickles with the good man hammer. aftyer that it depends how spanner scared you are!!
back ones the same unles u have an lsd
jack up your front wheels and spin them. check a stone hasn't got in between the disk and the dust plate at the back or that dust plate isn't bent. if you have a sticky caliper give it a few tickles with the good man hammer. aftyer that it depends how spanner scared you are!!
back ones the same unles u have an lsd
-
palerider325icab
- E30 Zone Regular

- Posts: 758
- Joined: Tue Jan 11, 2005 11:00 pm
- Location: NORTH WEST
Cheers guys i was thinking along the same line,but when i bought the car the guy said that the brakes have just been done as the warning light was on all the time but he said that the sensors where just not fitted.
Will have to get it sorted as its doing my head in lol.
Cheers
Ryan
Will have to get it sorted as its doing my head in lol.
Cheers
Ryan
-
Sjoerd320i
- E30 Zone Addict

- Posts: 4035
- Joined: Mon Jan 10, 2005 11:00 pm
- Location: Heemskerk, Holland
yeah dunno about the sensors but a good chance the sound started from when the brakes/pas were changed, i.e. faulty fitment or something like that

-
palerider325icab
- E30 Zone Regular

- Posts: 758
- Joined: Tue Jan 11, 2005 11:00 pm
- Location: NORTH WEST
I have also noticed that i cant get into the glove box the key just turns but does not release.
I have found to screws at the top just managed to fit a small driver in took both screws out but still wont open is there something else that i have to do to get it to open as i am getting a lock repair kit.
Cheers
Ryan
I have found to screws at the top just managed to fit a small driver in took both screws out but still wont open is there something else that i have to do to get it to open as i am getting a lock repair kit.
Cheers
Ryan
