Post
Sat Jul 09, 2005 3:21 pm
The red/black wire starts at fuse 27 in the fusebox and goes down through the big rubber grommet at the back of the glovebox. At the back of the glovebox thereis a soldered joint inside the loom with a branch going off to a couple of other things.
The wire goes all the way down the left hand cill, across the back seat, back down the right hand cill, and into the un neccessary loop in and out of the driver's door via the door pillar plug and socket.
When it comes back out of the door it goes to the interior light delay module socket, and then on to the locking module.
You can bypass it if you can find the joint at the back of the glovebox, and cut the wire that goes down to the cill, and then fit a replacement across behind the dash and down to the interior light delay socket, also cutting the wire that goes to the door socket.
The red /black wire also connects to pin H of the accessories socket (directly below the four pin radio socket).
