Need technical Q/A then you're in the right place
Moderator: martauto
-
driverstu
- E30 Zone Newbie

- Posts: 32
- Joined: Mon Aug 28, 2006 11:00 pm
- Location: telford, Shropshire
Tue Oct 09, 2007 9:33 pm
i have a 325isport and the heaters are only working on 4 i have been told its the resistor have brought one and don't no how to fit it can any one help

-
Chris-W
- E30 Zone Team Member

- Posts: 7219
- Joined: Tue May 24, 2005 11:00 pm
- Location: South Cheshire
-
Contact:
Tue Oct 09, 2007 9:35 pm
It's accessible from inside the glove box - remove the right hand black plastic panel and it's slightly above and in fron of the coolant valve.
-
driverstu
- E30 Zone Newbie

- Posts: 32
- Joined: Mon Aug 28, 2006 11:00 pm
- Location: telford, Shropshire
Thu Oct 11, 2007 5:19 pm
removed the plastic panel so i could see right threw to the back of the stereo and still cant see were it goes.....help

-
Moz
- E30 Zone Regular

- Posts: 494
- Joined: Sun Jun 10, 2007 11:00 pm
- Location: Hemel Hempstead, Hertfordshire
Thu Oct 11, 2007 5:22 pm
It can be accessed from the engine bay.
http://e30.bmwdiy.info/blower-resistor/index.html
I managed to do it by just spraying the contacts with WD40, jiggling the connectors can work too if they are not corroded.
Let me know if you need any help.
Moz
Everytime you idiot proof something, the world will just give you a bigger idiot.
-
Chris-W
- E30 Zone Team Member

- Posts: 7219
- Joined: Tue May 24, 2005 11:00 pm
- Location: South Cheshire
-
Contact:
Fri Oct 12, 2007 3:37 pm
Just had to change one so I took a pic just as I'd pulled the resistor out:

-
Moz
- E30 Zone Regular

- Posts: 494
- Joined: Sun Jun 10, 2007 11:00 pm
- Location: Hemel Hempstead, Hertfordshire
Fri Oct 12, 2007 4:16 pm
I stand corrected. Thnaks mods.
Moz
Everytime you idiot proof something, the world will just give you a bigger idiot.
-
driverstu
- E30 Zone Newbie

- Posts: 32
- Joined: Mon Aug 28, 2006 11:00 pm
- Location: telford, Shropshire
Sat Oct 20, 2007 4:28 pm
still cant find the f**cking thing doing my head in may be its time to get a garage to do it...do you have to remove anythink to get to it...
-
Brianmoooore
- E30 Zone Team Member

- Posts: 49358
- Joined: Mon Jan 10, 2005 11:00 pm
Sat Oct 20, 2007 5:13 pm
driverstu wrote:do you have to remove anythink to get to it...
Panel above the glove box, then the one to the right.
-
driverstu
- E30 Zone Newbie

- Posts: 32
- Joined: Mon Aug 28, 2006 11:00 pm
- Location: telford, Shropshire
Sat Oct 20, 2007 7:26 pm
and then should i see it or is it at the back .should it be easy to reach.should it just be lose in there or is it fixed to anythink...
-
Brianmoooore
- E30 Zone Team Member

- Posts: 49358
- Joined: Mon Jan 10, 2005 11:00 pm
Sat Oct 20, 2007 8:48 pm
See Chris-W's pic. The big heater valve should be fairly obvious! The resistor pack clips into the heater box just in front of it.
-
Chris-W
- E30 Zone Team Member

- Posts: 7219
- Joined: Tue May 24, 2005 11:00 pm
- Location: South Cheshire
-
Contact:
Sat Oct 20, 2007 8:55 pm
You can't see it , but if you grab, just ahead of and above the valve, the wires that plug into it and pull gently chances are you'll know when you've got it as it will pull out very easily.
-
driverstu
- E30 Zone Newbie

- Posts: 32
- Joined: Mon Aug 28, 2006 11:00 pm
- Location: telford, Shropshire
Tue Nov 06, 2007 9:48 pm
hi went to scrap yard to day and there is a 320 in there looked for the resistor and saw it straight away.but still cant find on my sport are they in a diffrent place on the sport....
