getting more from my 325i
Moderator: martauto
-
DANGEROUSuk
- E30 Zone Newbie
- Posts: 61
- Joined: Sun Jun 10, 2007 11:00 pm
- Location: TELFORD , SHROPSHIRE, UK
Hi i need some sugestions on how to get more from my 325i, Its a m20 /b25 high compression engine . i need some help on what i can do to get more BHP i have k&n in duction kit , tryed a performance chip but made the car idle very funny so i took it out , what do u suggest a kent cam or what else can i do to get mor BHP,ty
-
DANGEROUSuk
- E30 Zone Newbie
- Posts: 61
- Joined: Sun Jun 10, 2007 11:00 pm
- Location: TELFORD , SHROPSHIRE, UK
lol new u would say that
-
DANGEROUSuk
- E30 Zone Newbie
- Posts: 61
- Joined: Sun Jun 10, 2007 11:00 pm
- Location: TELFORD , SHROPSHIRE, UK
need an addy for rolling road test and dyno testing in shropshire u no of any
-
AlpineAde
- E30 Zone Team Member
- Posts: 3829
- Joined: Sun Feb 25, 2007 11:00 pm
- Location: Melbourne, Australia
It depends on how much power you want up from stock and how much you want to spend.
A turbo setup with sensible boost will give you what you need.
But...
If you only want an extra 30-40bhp look at a cam, headwork, inlet manifold, throttle body and a full free flow exhaust system.
210bhp would be about the limit without getting into FI.
A turbo setup with sensible boost will give you what you need.
But...
If you only want an extra 30-40bhp look at a cam, headwork, inlet manifold, throttle body and a full free flow exhaust system.
210bhp would be about the limit without getting into FI.
-
kam-325i
- E30 Zone Team Member
- Posts: 4851
- Joined: Tue Sep 27, 2005 11:00 pm
- Location: TELFORD !!!! (Shropshire) Stevetigger Land !!!
- Contact:
give me 2 mins and ill get it for you, just looking around Ebay for a MIG Welder.DANGEROUSuk wrote:need an addy for rolling road test and dyno testing in shropshire u no of any
Pete don't care about colour, He would shag a rainbow if he could find the end of it....
-
kam-325i
- E30 Zone Team Member
- Posts: 4851
- Joined: Tue Sep 27, 2005 11:00 pm
- Location: TELFORD !!!! (Shropshire) Stevetigger Land !!!
- Contact:
Just had a quick search, Cant find the address for the garage, but its hoshy's dad that owns it, i have PM'd him for the address.
Pete don't care about colour, He would shag a rainbow if he could find the end of it....
-
DANGEROUSuk
- E30 Zone Newbie
- Posts: 61
- Joined: Sun Jun 10, 2007 11:00 pm
- Location: TELFORD , SHROPSHIRE, UK
How much am i looking for a turbo convertion and will it burn my engine out?
-
Brianmoooore
- E30 Zone Team Member
- Posts: 49358
- Joined: Mon Jan 10, 2005 11:00 pm
For more modest and cheaper gains, lose the K & N boy racer rubbish, sell it on ebay, and fit one of Ant's zone chips. If you want a bit more, then add a Catcam, also from Ant, with a suitable chip.
-
DANGEROUSuk
- E30 Zone Newbie
- Posts: 61
- Joined: Sun Jun 10, 2007 11:00 pm
- Location: TELFORD , SHROPSHIRE, UK
Can i put a 3.5 straight into my 325i?
-
DANGEROUSuk
- E30 Zone Newbie
- Posts: 61
- Joined: Sun Jun 10, 2007 11:00 pm
- Location: TELFORD , SHROPSHIRE, UK
anybody got ants number?