CONVERTIBLE HOOD (HYDRAULIC SYSTEM)
Moderator: martauto
I'm still not able to get this hood to work and I need to check the hydraulic lines (A1.2.3.4 and B1.2.3.4 on the pump it's possible that they where not fitted right. I'm still in need of checking the wiring but need help with this........ if some one can take a photo that would be a good start and get the lines out of the way.
-
cliff_costa
- E30 Zone Regular
- Posts: 373
- Joined: Fri Aug 15, 2008 11:00 pm
Which bit do you want me to take a photo of.
Am I right in thinking the motor terns if you hold down the button
Am I right in thinking the motor terns if you hold down the button
-
cliff_costa
- E30 Zone Regular
- Posts: 373
- Joined: Fri Aug 15, 2008 11:00 pm
Is there the corect bmw oil and amount in the system.
It has been a long time since my sistam gave me truball so I will have to tack a look at mine in the mornin just to remind myself. The pipe numbers sound corect and if Eny of the valves opened then one of the rames wood move. This is why I sead about holding down the switch and at the same time manualy moving the hood and horseshoe through the sical. This will ever require a long stick or a friend to hold down the button. As you operat each micro switch it will open a diferant valve
It has been a long time since my sistam gave me truball so I will have to tack a look at mine in the mornin just to remind myself. The pipe numbers sound corect and if Eny of the valves opened then one of the rames wood move. This is why I sead about holding down the switch and at the same time manualy moving the hood and horseshoe through the sical. This will ever require a long stick or a friend to hold down the button. As you operat each micro switch it will open a diferant valve
-
cliff_costa
- E30 Zone Regular
- Posts: 373
- Joined: Fri Aug 15, 2008 11:00 pm
From the rear lihhts on the insid of the boot A1234 .
From the rear lights on the rear qulter side B1234 for pips
Did you get a chans to look at the oil yet?
There is also a macanical conecshon betwen motor and pump
From the rear lights on the rear qulter side B1234 for pips
Did you get a chans to look at the oil yet?
There is also a macanical conecshon betwen motor and pump
-
cliff_costa
- E30 Zone Regular
- Posts: 373
- Joined: Fri Aug 15, 2008 11:00 pm
Hiy. The ppipe order wil not stop the rams from moving all be it im the rong oder. this cannot be the problem have you checked the oil ?
Did you now that to open the horseshoe you nead to remove the carpit in the boot under the horseshoe this will give you access to the ram for the horseshoe posh both ends of the ram together to unlock it.
Did you now that to open the horseshoe you nead to remove the carpit in the boot under the horseshoe this will give you access to the ram for the horseshoe posh both ends of the ram together to unlock it.