indicators not working.
Moderator: martauto
-
Brianmoooore
- E30 Zone Team Member
- Posts: 49358
- Joined: Mon Jan 10, 2005 11:00 pm
Hazard switch itself is first port of call, especially if it hasn't been used in a decade or so. Easy to strip down and clean.
As a quick check, link together the green/purple and red/white of the switches socket with a short piece of wire. This should make the indicators work on the stalk, even with the ignition off.
As a quick check, link together the green/purple and red/white of the switches socket with a short piece of wire. This should make the indicators work on the stalk, even with the ignition off.