manual to auto conversion.

Need technical Q/A then you're in the right place

Moderator: martauto

Post Reply
User avatar
garfield
E30 Zone Newbie
E30 Zone Newbie
Posts: 25
Joined: Sat Dec 12, 2009 11:00 pm
Location: Westbury

Sun Feb 05, 2012 5:33 pm

Chaps I am fitting a 325 Auto sport box into my cabby and wondering the following;

If anyone has done this before and if so, what do I need from the gearbox loom? I have taken a picture of the loom, but i'm no david bailey!

Image

Cheers in advance!
mrLEE30
E30 Zone Team Member
E30 Zone Team Member
Posts: 6589
Joined: Tue Jan 18, 2005 11:00 pm
Location: Sweating buckets in Bahrain

Sun Feb 05, 2012 6:23 pm

What about cables to Control unit in the boot?
Image
User avatar
garfield
E30 Zone Newbie
E30 Zone Newbie
Posts: 25
Joined: Sat Dec 12, 2009 11:00 pm
Location: Westbury

Sun Feb 05, 2012 6:30 pm

The control unit is the Silver coloured box in the picture............hopefully!
mrLEE30
E30 Zone Team Member
E30 Zone Team Member
Posts: 6589
Joined: Tue Jan 18, 2005 11:00 pm
Location: Sweating buckets in Bahrain

Sun Feb 05, 2012 6:51 pm

Sorry yes it looked very small but when I zoom in I see the large plug.

The only other bit I cannot 100% see on zoom is the kickdown switch ( on the left?) and I think the TPS is different on an auto (also could be on the left)
Image
Jim320i
E30 Zone News / COTM Team
E30 Zone News / COTM Team
Posts: 10627
Joined: Sun Oct 25, 2009 11:00 pm
Location: Leicestershire
Contact:

Sun Feb 05, 2012 6:55 pm

Looks as if the kick down is already plugged up. And the TPS is different on autos, just to confirm :D
Post Reply