right lads need some info on sport suspension please.
i want to change the standard setup on a 325 touring to genuine sport tech 1 or 2 is there a difference?
and will the sport legs/rear springs /rear shocks swap straight
over please?
also inerested in the difference in spec ride height/spring poundage etc compaired to standard 325i ?
and did sports come with billie inserts as standard?
are the arbs thicker as well ?
cheers
sport touring?
Moderator: martauto
-
FASTFREDDIE
- E30 Zone Regular

- Posts: 343
- Joined: Sun Apr 12, 2009 11:00 pm
- Location: south london
its the work of a "maniac"
-
FASTFREDDIE
- E30 Zone Regular

- Posts: 343
- Joined: Sun Apr 12, 2009 11:00 pm
- Location: south london
right had a nose on the search
sport springs are standard height but stiffer than standard.
mtech spring is a little stiffer but lower by 15mm or so
green paint dash is sport and orange is the rears
b6 billies we're standard mtech 1 fitment
b4 billies for everyday use.
so on that basis im going to use b4 billies and mtech springs what i need to know
is if mtech springs have the same colour paint dash ie green and orange?
or if not what colour's should i look for?
oh and i could also use boge dampers from gsf
all this info was supplied by simon13 bss325i and b7 (trev)
cheers lads
sport springs are standard height but stiffer than standard.
mtech spring is a little stiffer but lower by 15mm or so
green paint dash is sport and orange is the rears
b6 billies we're standard mtech 1 fitment
b4 billies for everyday use.
so on that basis im going to use b4 billies and mtech springs what i need to know
is if mtech springs have the same colour paint dash ie green and orange?
or if not what colour's should i look for?
oh and i could also use boge dampers from gsf
all this info was supplied by simon13 bss325i and b7 (trev)
cheers lads
its the work of a "maniac"
- Brianmoooore
- E30 Zone Team Member

- Posts: 49358
- Joined: Mon Jan 10, 2005 11:00 pm
325 Touring shares its front control arms with the M3, so changing back to steel 'Sport' ones would be a downgrade.
-
FASTFREDDIE
- E30 Zone Regular

- Posts: 343
- Joined: Sun Apr 12, 2009 11:00 pm
- Location: south london
ok cheers brian,shall i just change the srings and inserts for mtech items then?
its the work of a "maniac"
