injectors

[highlander112001]

been doing alot of reading on the zone about injectors and how your better with the 4 spray pattern ones
i have quite alot of paperwork with my car which is pre-facelift 1987 2.0i
as far as i can make out they have never been touched since the car was built
i have found a set of blue ones on the bay bosh number 280150715
when i looked these up it said 1.8l/2.5 6cyl so could anybody tell me
A) are these 4 spray pattern ones
B) will they fit my bmw
just want to make sure before i put bid on as made an arse of it before buying stuff for it

[DaveD]

they are the standard injectors so they will fit but I think they will be exactly the same as the ones you take out...2 pintle (hole)

[Baz666]

http://www.e30zone.net/modules.php?name ... c&t=152207

[StuBeeDoo]

You say the car is pre-facelift. So it has L-jet injection??
You need the right type of injectors - you can't mix & match injectors between different management types.
L-jet must have L-jet injectors, and Motronic must have Motronic injectors.
Don't ask me exactly what the difference is though.

[highlander112001]

yeah as far as i know it is L-jet

[Luca318is]

L-jet injectors i think are low impedance type, motronic ones are high impedance... i've read that you can put jetronic ones on motronic with resistors but i'm not sure about this!