Calling all M10 experts!

Need technical Q/A then you're in the right place

Moderator: martauto

Post Reply
Stifla
E30 Zone Regular
E30 Zone Regular
Posts: 324
Joined: Sun Jun 26, 2005 11:00 pm
Location: The best part of the UK...The South!

Tue Feb 17, 2009 8:39 pm

I have an '88 316 carb with the older M10 engine, and last week it developed an idling fault, basically it runs beautifully until you let it idle, at which point it dies.

So after taking peoples advice, i checked all vacumn and air pipes, stripped the carb down and checked all gaskets, cleaned out the jets and checked the cable and linkage.

Still it wond idle, but occasionally when it does it sits at around 3000rpm!

Upon tracing one of the vacumn pipes throught the bulkhead i found what looks to me like an ecu mounted under the headlight switch area.

Does anybody know what this controls?

Its the most basic e30 ive ever owned, no electric windows, power steering, fog lights etc, what use could it have other than controlling the lousy and over complicated carb? Its a Pierburg 2BE if this helps?

I cant afford a webber conversion, so i need to fix this and soon.
Any help is really appreciated!
Banjo1981
E30 Zone Regular
E30 Zone Regular
Posts: 823
Joined: Thu Nov 27, 2008 11:00 pm
Location: Birminghamy goodness.

Tue Feb 17, 2009 9:21 pm

The box you've found is the electronic control unit (automatically adjusts the settings during warm up and at normal temp.)

Sorry, I know sod all else about the problem, Haynes suggests all sorts from a clogged filter (air or fuel) to a leaky head gasket.

Good luck though
town325i
E30 Zone Team Member
E30 Zone Team Member
Posts: 7050
Joined: Thu Jun 26, 2008 11:00 pm
Location: cannock staffordshire

Tue Feb 17, 2009 9:40 pm

i had a problem years ago with my m10 all of a sudden it wouldnt idle it would just cut out all it needed was the mixture adjusting and then it was fine
Image
User avatar
zigmund
E30 Zone Newbie
E30 Zone Newbie
Posts: 27
Joined: Wed May 14, 2008 11:00 pm

Sun Jun 07, 2009 5:17 pm

Still it wond idle, but occasionally when it does it sits at around 3000rpm! --> i have the same problem since yesterday after i cleaned it a bit. How did u fix it , i try to understand how it works , but damn , that isn't easy , i have some german and spanish data sheets , from wich i almost understnad nothing
DanThe
E30 Zone Team Member
E30 Zone Team Member
Posts: 28646
Joined: Sat Sep 10, 2005 11:00 pm
Location: Staffs
Contact:

Sun Jun 07, 2009 5:31 pm

Apparently a 2ltr ford carb fits and works well
Alex
Married to the E30 Zone
Married to the E30 Zone
Posts: 22666
Joined: Fri Feb 11, 2005 11:00 pm
Location: Johannesburg, South Africa

Sun Jun 07, 2009 6:03 pm

change the carb to a weber or what dan suggests

my 316 was a dog in the winter and it was the carb there terrible
E30-830
E30 Zone Newbie
E30 Zone Newbie
Posts: 144
Joined: Fri Feb 27, 2009 11:00 pm
Location: Co.Louth, Ireland

Sun Jun 07, 2009 8:40 pm

DanThe wrote:Apparently a 2ltr ford carb fits and works well
Sound interesting. :) From which ford??
User avatar
petitrobin
E30 Zone Newbie
E30 Zone Newbie
Posts: 5
Joined: Mon Feb 28, 2005 11:00 pm

Sun Jun 07, 2009 10:00 pm

There's a kit availible (on Ebay) with a brand new Weber, or you can put up a post here for a S/hand one. I got one here with kit and K+N filter for around £30 two years ago and I haven't looked back. The only difficulty is in fittig a manual choke, which I keep forgetting, but the car starts just as well without the choke, it just doesn't accelerate.
I makes a nicer noise, saves petrol and increases power !
Post Reply