rattle driving me mad. Changed top mounts. Didn't fix it

Need technical Q/A then you're in the right place

Moderator: martauto

Post Reply
ChrisBarns
ConvertibleChris
Posts: 519
Joined: Sat Nov 19, 2005 11:00 pm
Location: Norwich

Thu Jul 24, 2008 12:24 pm

I have a "tinckle" from somewhere around the rear suspension, drivers side. I've changed the knackered top mounts and wiggled every thing in the area but can't find anything loose. It sounds a bit like a heat sheild is loose or a wheelnut has come off and is bouncing around inside the centre cap.

Help please!

325i convertable
daimlerman
**BANNED**
Posts: 15968
Joined: Mon Feb 27, 2006 11:00 pm
Location: Grumpy Old Man

Thu Jul 24, 2008 12:34 pm

Is the bump stop correctly positioned on the damper?Is the damper lower mounting bolt tight :o: ?
Youth is wasted on the young.
ChrisBarns
ConvertibleChris
Posts: 519
Joined: Sat Nov 19, 2005 11:00 pm
Location: Norwich

Thu Jul 24, 2008 12:37 pm

lower mounting defo tight - just tourqued it up. Where is bump stop?
DaveD
E30Zone Wiki Specialist
Posts: 5129
Joined: Tue Jan 11, 2005 11:00 pm
Location: Sheffield

Thu Jul 24, 2008 12:43 pm

something loose inside the boot?
Image
ChrisBarns
ConvertibleChris
Posts: 519
Joined: Sat Nov 19, 2005 11:00 pm
Location: Norwich

Thu Jul 24, 2008 12:47 pm

defo comes from underneath the car and happens when I go over bumps. Was there beofre I replaced the top mounts.
daimlerman
**BANNED**
Posts: 15968
Joined: Mon Feb 27, 2006 11:00 pm
Location: Grumpy Old Man

Thu Jul 24, 2008 12:48 pm

The bumpstop is on top of the damper and under the plastic shroud,only mention it because when I recently fitted new dampers/top mounts I managed to assemble I with the bumpstop on top of the shroud and that side knocked...the other side knocked because I failed to tighten the lower bolt.... :o:
Youth is wasted on the young.
mattsbmw
E30 Zone Regular
E30 Zone Regular
Posts: 447
Joined: Sun Feb 10, 2008 11:00 pm
Location: Heanor, Derbyshire

Thu Jul 24, 2008 1:11 pm

Barke pads rattleing? mine do but most of the time, not just going over bumps
Image
georgen
E30 Zone Camper
E30 Zone Camper
Posts: 1356
Joined: Mon Jan 10, 2005 11:00 pm
Location: Thurso

Thu Jul 24, 2008 3:12 pm

Is the noise like a jingle when you go over bumps ? If so, I reckon the brake guard retaining pin thing is loose. I have the same noise on mine, but I'm about to change the guard and pin ( which I know is loose ) when I get the rear wheel bearing done next week.
01' 330ci Sport
02' 530i Sport Saloon
52' 330i Individual Touring
Ziggy
E30 Zone Team Member
E30 Zone Team Member
Posts: 11534
Joined: Mon Jan 10, 2005 11:00 pm
Location: floating round my tin can...

Thu Jul 24, 2008 3:18 pm

Does it do it with the handbrake (slightly!) on?
E30 in need of wiring loom smoke since April '11...
Simon13
The longest resto in the world !
Posts: 22697
Joined: Mon Jan 10, 2005 11:00 pm
Location: Camberley, Surrey don't u know

Thu Jul 24, 2008 6:55 pm

anti roll bar drop links shagged?, is the bracket secure to the trailing arm?
User avatar
murran
E30 Zone Squatter
E30 Zone Squatter
Posts: 1683
Joined: Sat Jul 28, 2007 11:00 pm
Location: sheffield, good old sheffield!

Sun Jul 27, 2008 1:07 pm

mattsbmw wrote:Barke pads rattleing? mine do but most of the time, not just going over bumps
yeah mine rattle too. no big deal really.
Image
e21 killing tyres with e30 325 powerzzz
drifting on the cheap......... www.trampdrift.com
e21zone........ www.bmwe21.net
User avatar
Brianmoooore
E30 Zone Team Member
E30 Zone Team Member
Posts: 49358
Joined: Mon Jan 10, 2005 11:00 pm

Sun Jul 27, 2008 2:15 pm

Rear silencer heat shield!
Taxin
E30 Zone Newbie
E30 Zone Newbie
Posts: 142
Joined: Sun Jul 02, 2006 11:00 pm
Location: Skelmersdale

Sun Jul 27, 2008 11:21 pm

will be your brake pads rattling new rear discs should fix it
BMW E30 Convertible - 2.5

Image
aj_mckay
E30 Zone Squatter
E30 Zone Squatter
Posts: 1782
Joined: Sun Nov 11, 2007 11:00 pm
Location: Winchester

Mon Jul 28, 2008 1:40 pm

i've got the same thing on mine at the moment but i'm pretty sure the shocks are sh4gged so going to replace them and see if it sorts it.
Post Reply