Sorry mods if this is in the wrong section, already done a search and couldn't find anything.
Any help would be lovely
Smoked hella cross hairs template.
Moderator: martauto
Has anyone got a link to the template for the cross hairs for the DIY smokie hella conversion?
Sorry mods if this is in the wrong section, already done a search and couldn't find anything.
Any help would be lovely
Sorry mods if this is in the wrong section, already done a search and couldn't find anything.
Any help would be lovely
Cheers Tony but no welding facilities at my gaff.
I have everything ready to go for the cross hairs right here just need the template.
Ive made one set already but armco has claimed one half of the set
I have everything ready to go for the cross hairs right here just need the template.
Ive made one set already but armco has claimed one half of the set
Thats cool mate,pain in the arse to do though arent theyoguz327 wrote:Cheers Tony but no welding facilities at my gaff.
I have everything ready to go for the cross hairs right here just need the template.
Ive made one set already but armco has claimed one half of the set
good job the end result is worth it!
Heres a pic anyway of the ones ive got.
eko wrote:Thats cool mate,pain in the arse to do though arent theyoguz327 wrote:Cheers Tony but no welding facilities at my gaff.
I have everything ready to go for the cross hairs right here just need the template.
Ive made one set already but armco has claimed one half of the set
good job the end result is worth it!
Heres a pic anyway of the ones ive got.
Cheers Tony, they do look proper.
I used somy ally sheeting last time, not as good as your steel ones but did the job ok.
Fiddly as hell to do but worth the messin around.
Ed I wasnt going to do anything with them on here till id welded up the slots on a set and test fitted them to a set of lights.ed325i wrote:eko how much
If they were/are ok i was going to weld a few up each time the mig was out,recut the new slot and flog them for a few quid on here/Ebay?
If you want ill post you a set,you weld/try them and let me know there good and everyones happy.
Sound fair?
Excuse me fro being thick,what are they for obviously headlights what do they do ? 
Alpina B3 3.3 Santorini Blue,White Buffalo hide with Blue Piping,Black Shadowline. No 242.
318 iS Diamond Schwarz.
Porsche 944 Turbo S,Special Order Black,Very Limited Numbers and Very Quick......
318 iS Diamond Schwarz.
Porsche 944 Turbo S,Special Order Black,Very Limited Numbers and Very Quick......
Cheers Max,Buds give me the same look
Alpina B3 3.3 Santorini Blue,White Buffalo hide with Blue Piping,Black Shadowline. No 242.
318 iS Diamond Schwarz.
Porsche 944 Turbo S,Special Order Black,Very Limited Numbers and Very Quick......
318 iS Diamond Schwarz.
Porsche 944 Turbo S,Special Order Black,Very Limited Numbers and Very Quick......
As said,not even confirmed they fit yet,although they were copied from the template doing the rounds so ne reason why not!shazE30 wrote:send me some...especially now that im fitting my hid kit could do this at the same time
Wait till Ed confirms and ill do a set very cheap
Fooking hell guys this is Oguzs thread not a group buy -
Bob_S
- Engaged to the E30 Zone
- Posts: 5412
- Joined: Sat Jun 11, 2005 11:00 pm
- Location: chester, cheshire
eko, word of advice before you get the mig out...
take a headlamp apart stand one up as i should and place the glass back over the top.
They look exactly like a set I got off someone off here, I spent ages trying to get them to fit cut new holes etc... remember that welding stainless steel requires special wire!
The ones I had look identical and were way too tall to fit in the headlight by a long way.
I am making a set of my own from a steel shelving unit, seems to be good size for it and it's free.
I believe ziggy has a template for the cross hairs if I dont have it in my PM box infact!
take a headlamp apart stand one up as i should and place the glass back over the top.
They look exactly like a set I got off someone off here, I spent ages trying to get them to fit cut new holes etc... remember that welding stainless steel requires special wire!
The ones I had look identical and were way too tall to fit in the headlight by a long way.
I am making a set of my own from a steel shelving unit, seems to be good size for it and it's free.
I believe ziggy has a template for the cross hairs if I dont have it in my PM box infact!
Bollocks to this 24v scrap!
eXACTLY THE REASON i WASNT PLANNING ON OFFERING THEM OUT UNTILL THEY WERE TESTED.Bob_S wrote:eko, word of advice before you get the mig out...
take a headlamp apart stand one up as i should and place the glass back over the top.
They look exactly like a set I got off someone off here, I spent ages trying to get them to fit cut new holes etc... remember that welding stainless steel requires special wire!
The ones I had look identical and were way too tall to fit in the headlight by a long way.
I am making a set of my own from a steel shelving unit, seems to be good size for it and it's free.
I believe ziggy has a template for the cross hairs if I dont have it in my PM box infact!
iVE SENT A SET TO eD WHICH HE SHOULD GET BY MORNING SO HOPEFULLY HE WILL CONFIRM SOON.
-
Bob_S
- Engaged to the E30 Zone
- Posts: 5412
- Joined: Sat Jun 11, 2005 11:00 pm
- Location: chester, cheshire
right-o!
I reckon it can be done but I got hacked off and made some more from thinner steel.
I cant remember who I got mine off but as soon as I saw them I knew it wasnt going to be as straight forward as one had hoped!
I reckon it can be done but I got hacked off and made some more from thinner steel.
I cant remember who I got mine off but as soon as I saw them I knew it wasnt going to be as straight forward as one had hoped!
Bollocks to this 24v scrap!
