Post
Wed Nov 08, 2006 2:21 pm
normally failed headgasket will result in overheating, and very rapid overheating i.e. within minutes of starting car.
But can also be seen by: 1. white residue in the oil and around oil filller cap. 2. excessive white steamy smoke (but BMW have a tendancy to do this anyway) 3. poor running and or a misfire
initial check is to remove the plugs, if one looks extreamly clean then that is a good indication that all is not well (plugs should be nice and brown FYI)
next best checked with a compression tester , you are looking for all cylinders to be within 5-10% of each other depending on the age of the car, if one is right down then it COULD be headgasket, but could also be 100 other things too!
If you are not mechanically minded and dont wish to be ripped off then my best advice to you and anyone is to buy the Bentley Service manual. There are very good fault finding sections you can do at home with minimum tools and equipment so at least you have some sort of an idea if things go wrong.
i think there is a link on E30 home page, if not get on Amazon my son!
mrlee
