I need new wheels and have a good offer on some BMW Mini wheels.
I know both cars a 4 stud.
Anyone help please??
James
Do the wheels off a new BMW Mini fit an E30 3 series????
Moderator: martauto
-
Falkster
- Engaged to the E30 Zone
- Posts: 5787
- Joined: Fri Sep 30, 2005 11:00 pm
- Location: Yorkshire
The PCD is the same, as is the centre bore but you will probably need some spacers as the Mini wheels run 35mm offset
-
dazleeds
- old skool raver
- Posts: 12883
- Joined: Fri Apr 01, 2005 11:00 pm
- Location: Empire Building @
i think the studs match
but the offset is a fair bit different i think
so you would need spacers to fit them
but i could be wrong?
but the offset is a fair bit different i think
so you would need spacers to fit them
but i could be wrong?
www.oldskoolfantasy.co.uk
in the shit,the one to blame,yeh its all my fault ;)
in the shit,the one to blame,yeh its all my fault ;)
-
tregzybmw
- E30 Zone Newbie
- Posts: 209
- Joined: Sat Jul 01, 2006 11:00 pm
- Location: plymouth
The bolt pattern is 4x100mm.
The centerbore is 56.1mm.
The offset (ET) can range from 35mm to 52mm depending on the wheel size.
this means that, as far as i know, everything is ok, but the offset is too high. you will need pro-spacers, of around 30mm...this isnt the best thing to do, i would say 10-20mm spacers at most really
The centerbore is 56.1mm.
The offset (ET) can range from 35mm to 52mm depending on the wheel size.
this means that, as far as i know, everything is ok, but the offset is too high. you will need pro-spacers, of around 30mm...this isnt the best thing to do, i would say 10-20mm spacers at most really
-
tregzybmw
- E30 Zone Newbie
- Posts: 209
- Joined: Sat Jul 01, 2006 11:00 pm
- Location: plymouth