mmmmmmm how ..........empty

Post Mon May 22, 2006 3:55 pm

How nice and clean and empty the bay is now - and rust/rot free too, even around the fusebox/battery tray

- just prime for a good coating of anti-corrosion paint to keep it that way

Post Mon May 22, 2006 4:59 pm

I see you bolt cropped the wiring harness! good man, thats what a 320 harness deserves.lol

That picture just shows how big the vacuum tank for the brakes really is, and they still arn't even that good!

Have you designed the engine mounts or are you going to do that once the engine is hoisted in there to give you some idea of what to fabricate?

Post Mon May 22, 2006 5:21 pm

Hiya Jon - the engine harness for the M20 engine is no good to me, the check indicator in the roof is no good to me neither, as that is being replaced with a SECS monitor

The engine mounts i have an idea for already, as with the gearbox mount and propshaft - will just have to see ;)

the sump for the engine is the problem at the moment - I need to have one made

not to worry tho

Post Mon May 22, 2006 5:52 pm

What engine are you putting in ?

Post Mon May 22, 2006 5:58 pm

a 350 horsepower YB engine from my late Cosworth (I wrote it off while cracking on with a seriously sub 9 min lap of the Nurbugring

Post Mon May 22, 2006 6:02 pm

Andy335Touring wrote:What engine are you putting in ?

YB cossie from the link I'd guess Andy, just hope he has more luck with his than Fuzzy did.

Mark.

Post Mon May 22, 2006 7:01 pm

fozzymonster wrote:
Andy335Touring wrote:What engine are you putting in ?
YB cossie from the link I'd guess Andy, just hope he has more luck with his than Fuzzy did.

Mark.

i didn't see the link

Good luck with the swap

Post Mon May 22, 2006 8:18 pm

at least your doing the work yourself, so you wont have the problems i had with the muppet that done mine.it seems to be the way to go at the moment as thats 3 cossie e30's on the zone at the moment

although i still say mine is the coolest as its the only touring