Hello everyone,
I'm looking for some parts, but being new to the UK I don't really know the good places to search for E30 parts.
The parts I am currently looking for are:
LJetronic idle control valve (BMW Part #13411709898 or 13411707395)
Fuse box
Wiring harness
Ideally I'd like to find a new idle control valve, but I'm open to used units. I'm guessing the fuse box and wiring harness will have to be used. In any case, I'd love to get an idea on prices and/or sources. Any help is more than welcome!
Cheers.
Looking for some parts
Moderator: martauto
-
Satan
- Old Skooler

- Posts: 2491
- Joined: Thu Nov 16, 2017 11:00 pm
- Location: Formally SexyLady and Diable
Have you tried cleaning the ICV?
-
Cloggy Saint
- Old Skooler

- Posts: 8027
- Joined: Sun Jan 09, 2005 11:00 pm
- Location: zummerzet
-
flybynite
- E30 Zone Squatter

- Posts: 1699
- Joined: Sat Dec 02, 2017 11:00 pm
If it has one of those ICV's then it is not L-Jetronic.
What car is it exactly?
What car is it exactly?
-
pabdel
- E30 Zone Newbie

- Posts: 5
- Joined: Sun May 17, 2020 8:47 pm
It's a 325 ETA. I think it is 84. I can ask my brother for more details if required (the car is back in Argentina, I'm trying to get some of the parts for him because they are hard to find an expensive AF back there).
-
flybynite
- E30 Zone Squatter

- Posts: 1699
- Joined: Sat Dec 02, 2017 11:00 pm
That is not a car that has been seen much in the UK you might have a tough time getting specific bits for an eta
It does seem to have an L-shaped ICV like the Motronic 325 but the eta ICV part number is specific to the eta, not sure if a later Motronic one would work,
It is not the same as the ICV on the L-Jetronic 323i or 320i which looks like this
You do not have the required permissions to view the files attached to this post.
-
rix313
- E30 Zone Team Member

- Posts: 4967
- Joined: Fri Oct 31, 2008 11:00 pm
- Location: Silverstone
I have a fuse box but you’d need to re-wire it.
-
pabdel
- E30 Zone Newbie

- Posts: 5
- Joined: Sun May 17, 2020 8:47 pm
According to my brother, 318 should use the same valve.flybynite wrote: ↑Mon May 18, 2020 9:48 pmThat is not a car that has been seen much in the UK you might have a tough time getting specific bits for an eta
It does seem to have an L-shaped ICV like the Motronic 325 but the eta ICV part number is specific to the eta, not sure if a later Motronic one would work,
It is not the same as the ICV on the L-Jetronic 323i or 320i which looks like this
post-106-1423410210,3016.jpg
BTW we haven't tried cleaning the valve because it's not even there [cringe face]. Straight up missing. I'll have to keep looking for one. Or eventually, buy one on the US.

