Page 1 of 1
using RealOEM help
Posted: Tue Apr 16, 2019 12:17 pm
by ronveerlal
Hi im looking for to replace my speedo sensor which is located on the rear diff I can't seem to find it on real oem can anyone help
thanks
http://www.realoem.com/bmw/enUS/partgrp ... BMW-316i/b]
Re: using RealOEM help
Posted: Tue Apr 16, 2019 12:52 pm
by jmc330i
How come you want to replace the sensor?
Re: using RealOEM help
Posted: Tue Apr 16, 2019 12:56 pm
by ronveerlal
jmc330i wrote: ↑Tue Apr 16, 2019 12:52 pm
How come you want to replace the sensor?
speedo isn't working
Re: using RealOEM help
Posted: Tue Apr 16, 2019 1:10 pm
by jmc330i
Are you sure its the sensor? They rarely give issues, it's more likely the wiring from the plug. Brianmooore will give a better explanation, but the copper in the wire hardens over time and starts to breakdown.
The usual fix is to the replace a length of the wire (20-30cm or so) from the plug. An E30 headlight plug and wiring can be used and is likely in better condition as it hasn't spent a 25+ years under the car lol
Another issue can be a dry joint on the back of the cluster, if the odometer still works when the Speedo doesn't, it's likely this is the problem.
Re: using RealOEM help
Posted: Tue Apr 16, 2019 1:23 pm
by Cloggy Saint
Here's the link for the sensor
http://www.realoem.com/bmw/enUS/showpar ... Id=33_0121 but as jmc says it's far more likely to be a break in the wiring from the sensor.
Re: using RealOEM help
Posted: Tue Apr 16, 2019 5:52 pm
by ronveerlal
Re: using RealOEM help
Posted: Tue Apr 16, 2019 7:11 pm
by BenHar
08 Pulse generator, speedometer
Re: using RealOEM help
Posted: Tue Apr 16, 2019 7:13 pm
by BenHar
Have you tested the wires at the sensor?
Have you taken any notice of the advice you've been given here?
Ben