Tweeter pod wires

General E30 related discussions -
Please put technical questions in E30 Tech Help forum below

Moderator: martauto

BROOMY
busy saving Clifford
Posts: 425
Joined: Sat Mar 14, 2009 11:00 pm

Post Sun Jun 22, 2014 10:23 pm

Are the wires for the tweeters already there?
I don't think they're there but I'm not sure.
User avatar
Brianmoooore
E30 Zone Team Member
E30 Zone Team Member
Posts: 49359
Joined: Mon Jan 10, 2005 11:00 pm

Post Sun Jun 22, 2014 10:30 pm

Should be there, taped up just under the top edge of the door card. Other ends are near the speakers in the foot wells.
BROOMY
busy saving Clifford
Posts: 425
Joined: Sat Mar 14, 2009 11:00 pm

Post Mon Jun 23, 2014 12:01 am

Even if it never originally had them?
They on the same circuit as the central locking?
BROOMY
busy saving Clifford
Posts: 425
Joined: Sat Mar 14, 2009 11:00 pm

Post Mon Jun 23, 2014 11:54 pm

Bump.
User avatar
Brianmoooore
E30 Zone Team Member
E30 Zone Team Member
Posts: 49359
Joined: Mon Jan 10, 2005 11:00 pm

Post Tue Jun 24, 2014 12:15 am

Brianmoooore wrote:Should be there, taped up just under the top edge of the door card. Other ends are near the speakers in the foot wells.
BROOMY
busy saving Clifford
Posts: 425
Joined: Sat Mar 14, 2009 11:00 pm

Post Tue Jun 24, 2014 12:54 am

Oh ok.
Do you need an amp or anything ?
User avatar
Brianmoooore
E30 Zone Team Member
E30 Zone Team Member
Posts: 49359
Joined: Mon Jan 10, 2005 11:00 pm

Post Tue Jun 24, 2014 9:10 am

You need a high pass filter to lock the lower frequencies from reaching the tweeters.
In the OE set up, this was just a capacitor mounted on the matching footwell speaker. IIRC, it was a 6.8uF bipolar electrolytic type, connected in series with one of the tweeter wires.
pacerpete
E30 Zone Team Member
E30 Zone Team Member
Posts: 18165
Joined: Sun Jan 23, 2005 11:00 pm
Location: Iver heath. South bucks.

Post Tue Jun 24, 2014 9:13 am

Brianmoooore wrote:You need a high pass filter to lock the lower frequencies from reaching the tweeters.
In the OE set up, this was just a capacitor mounted on the matching footwell speaker. IIRC, it was a 6.8uF bipolar electrolytic type, connected in series with one of the tweeter wires.

Brian, stop being cruel ! :)
BROOMY
busy saving Clifford
Posts: 425
Joined: Sat Mar 14, 2009 11:00 pm

Post Tue Jun 24, 2014 6:04 pm

Ok bought all items who wants to fit for me.
beemerbird
Married to the E30 Zone
Married to the E30 Zone
Posts: 8620
Joined: Mon Mar 24, 2008 11:00 pm
Location: Suffolk

Post Tue Jun 24, 2014 6:12 pm

Are you talking about fitting the tweeters, or the capacitor? Fitting the tweeters takes less than a minute each side. Just prise off the black plastic triangle where the tweeters fit, push the crimps that are on the wires onto the tweeters and push into place. If you can open a yoghurt pot you are able to do this :)
If it ain't broke, fix it till it is
BROOMY
busy saving Clifford
Posts: 425
Joined: Sat Mar 14, 2009 11:00 pm

Post Tue Jun 24, 2014 6:15 pm

My previous post was a joke.
Why the capacitor?
Think I already got 1 on the power lead if it's a black box.
beemerbird
Married to the E30 Zone
Married to the E30 Zone
Posts: 8620
Joined: Mon Mar 24, 2008 11:00 pm
Location: Suffolk

Post Tue Jun 24, 2014 6:18 pm

Brianmoooore wrote:You need a high pass filter to lock the lower frequencies from reaching the tweeters.
In the OE set up, this was just a capacitor mounted on the matching footwell speaker. IIRC, it was a 6.8uF bipolar electrolytic type, connected in series with one of the tweeter wires.
If it ain't broke, fix it till it is
BROOMY
busy saving Clifford
Posts: 425
Joined: Sat Mar 14, 2009 11:00 pm

Post Tue Jun 24, 2014 6:19 pm

So what's the black box for?
User avatar
Brianmoooore
E30 Zone Team Member
E30 Zone Team Member
Posts: 49359
Joined: Mon Jan 10, 2005 11:00 pm

Post Tue Jun 24, 2014 6:36 pm

http://www.ebay.co.uk/itm/like/30035977 ... 0&ff14=108

Black box is probably a (unnecessary) filter in the power feed.

Connect the tweeters up without the capacitors (like the idiot who fitted the ICE in my red touring did ) and they will have a very short life.
BROOMY
busy saving Clifford
Posts: 425
Joined: Sat Mar 14, 2009 11:00 pm

Post Tue Jun 24, 2014 6:40 pm

So I need to buy 2 of them then the tweeter pods?
User avatar
Jozi
E30 Zone Addict
E30 Zone Addict
Posts: 3076
Joined: Thu Nov 22, 2007 11:00 pm
Location: Dublin, Ireland

Post Tue Jun 24, 2014 7:01 pm

Alternatively, get some new speakers for the footwel that come with the tweeter and it will have the filter included in the set. Then butcher the tweeter pod by removing the old original tweeter and glue in the new one.