Will a 316 radiator be ok in a 325?

General E30 related discussions -
Please put technical questions in E30 Tech Help forum below

Moderator: martauto

User avatar
george101
E30 Zone Newbie
E30 Zone Newbie
Posts: 113
Joined: Fri Apr 20, 2012 11:00 pm

Post Tue Jun 12, 2012 9:45 am

Fitted my 325 into my e30 but I'm using a 316 radiator? Will this be ok? It's about the same length just abit wider, and has the filler bottle attached to the side.
magpie
Old Skooler
Old Skooler
Posts: 28035
Joined: Sun Jun 29, 2008 11:00 pm
Location: Consett,Durham.

Post Tue Jun 12, 2012 10:12 am

if you've managed to plumb the hoses up then i don't see why it wont be ok .i'd keep an eye on the temp gauge after it's bled up without driving it .

not recommended though .
Image
m52 b30 stroker 6-speed 318is Galvanizer
m42 touring
+ a yard full of scrap turds :)
User avatar
george101
E30 Zone Newbie
E30 Zone Newbie
Posts: 113
Joined: Fri Apr 20, 2012 11:00 pm

Post Tue Jun 12, 2012 10:59 am

magpie wrote:if you've managed to plumb the hoses up then i don't see why it wont be ok .i'd keep an eye on the temp gauge after it's bled up without driving it .

not recommended though .
Yeah plumbed all the hoses up, Just gotta bleed the system and I'll keep an eye on the temp gauge
Grrrmachine
E30 Zone Wiki / Team Member
E30 Zone Wiki / Team Member
Posts: 8043
Joined: Sat Feb 09, 2008 11:00 pm
Location: Warsaw, Poland

Post Tue Jun 12, 2012 11:25 am

Be very thorough with your bleeding. The M20B25 is a bitch to bleed, and is also the most sensitive engine to overheating; the heads can crack very quickly, so do the job properly.
bmw9818
E30 Zone Addict
E30 Zone Addict
Posts: 2561
Joined: Tue Aug 11, 2009 11:00 pm
Location: Croydon

Post Fri Jun 15, 2012 1:40 pm

id of thought it would make a difference, ive got a 316i with a 325 radiator stays just above 1/4, only time its gone up a bit was when it was 28degrees and in traffic, id say it probably would overheat on hot days, but you should be orite seems like weve allready had summer! :(