do they make standard style exhausts in stainless steel (just want it to be one thing that wouldnt need to be replaced again)
wouldnt the extra cost be worth it if you were planning to keep the car for many years
stainless steel exhaust
Moderator: martauto
i was thinking of changing the exhaust for the above when it needs it. i would be after a non performance one with a standard tail pipe finish.
do they make standard style exhausts in stainless steel (just want it to be one thing that wouldnt need to be replaced again)
wouldnt the extra cost be worth it if you were planning to keep the car for many years
do they make standard style exhausts in stainless steel (just want it to be one thing that wouldnt need to be replaced again)
wouldnt the extra cost be worth it if you were planning to keep the car for many years
-
kam-325i
- E30 Zone Team Member
- Posts: 4851
- Joined: Tue Sep 27, 2005 11:00 pm
- Location: TELFORD !!!! (Shropshire) Stevetigger Land !!!
- Contact:
The extra cost is worth it, if you are going to keep the car for a long time, but finding a non-performance stainless exhaust might take some time...
Pete don't care about colour, He would shag a rainbow if he could find the end of it....
What about Fritz's bits mate bit expensive but well worth it http://www.fritzsbits.co.uk/exhausts.htm
-
Rtaylor2208
- E30 Zone Addict
- Posts: 3004
- Joined: Mon Oct 11, 2010 11:00 pm
- Location: Ayr, Ayrshire, Scotland
Near me there is a place called RMS that will make any custom exhaust you want in stainless not sure if they could make to order without seeing the car. If you google RMS prestwick in Ayrshire Scotland you'll get there details. Did a full system for a pulsar gtir I had a few years back for £400
surely a brand new exhaust from BMW would be the best way to go, if you didnt want performance stainless, thats still good for 20 years ,a custom made standard stainless one, wouldnt me made as good as bmws performance wise would it, sounds a bit daft to me
look up the pics someone posted of a standard bmw exhaust cut open posted the other day
look up the pics someone posted of a standard bmw exhaust cut open posted the other day
why couldnt a stainless steel exhaust be made as well as a bmw one? do you realise the cost of a complete bmw exhaust system?polsta wrote:surely a brand new exhaust from BMW would be the best way to go, if you didnt want performance stainless, thats still good for 20 years ,a custom made standard stainless one, wouldnt me made as good as bmws performance wise would it, sounds a bit daft to me
look up the pics someone posted of a standard bmw exhaust cut open posted the other day
i want a exhaust to last for years. mines a 318 touring so theres no point buying a boy racer exhaust that will be to loud. stainless doesnt rust, so thats why i want one. it sounds daft to you because its not a tec 1 sport exhaust
sports exhaust has nothing to do with it, i put a new standard one (not bmw) on my old isdanryan wrote:why couldnt a stainless steel exhaust be made as well as a bmw one? do you realise the cost of a complete bmw exhaust system?polsta wrote:surely a brand new exhaust from BMW would be the best way to go, if you didnt want performance stainless, thats still good for 20 years ,a custom made standard stainless one, wouldnt me made as good as bmws performance wise would it, sounds a bit daft to me
look up the pics someone posted of a standard bmw exhaust cut open posted the other day
i want a exhaust to last for years. it sounds daft to you because its not a sport exhaust
if you read my post properly...a bmw will last 20 years, is that not long enough ? and a bmw one ie engineered to precision and made for your car , like i said...if you saw the thread/pics of the oem bmw one cut open, youd then see why they are the price they are and youd know a custom company would not be able to custom build one as good but in stainless
you want a "standard" exhaust, you then have the argument of stainless lastability VS bmw performance and quality, the stainless wont be as good performance wise and wouldnt be a stainless version of a bmw one by a long shot i dbout
a brand new bmw system would win for me and would be a nicer car with it
-
hongkongfuey
- Mad-tango-geezer
- Posts: 3304
- Joined: Fri Jun 08, 2007 11:00 pm
- Location: portsmouth
Genuin bmw would cost more and weigh more
if there wern't people like me,
with cars like mine,
who would you put down to make yourself feel better?
with cars like mine,
who would you put down to make yourself feel better?
-
hongkongfuey
- Mad-tango-geezer
- Posts: 3304
- Joined: Fri Jun 08, 2007 11:00 pm
- Location: portsmouth
Genuin bmw would cost more and weigh more
if there wern't people like me,
with cars like mine,
who would you put down to make yourself feel better?
with cars like mine,
who would you put down to make yourself feel better?
your post was hard to read properly... i doubt the bmw exhaust would last 20years. i dont need performance, just longativity
im sure there are plenty of good custom exhaust people out there who would disagree with you
im sure there are plenty of good custom exhaust people out there who would disagree with you
They do as long as you're not up in Scotland.danryan wrote:i doubt the bmw exhaust would last 20years.
you still need standard performance, you dont want a "drop" in performance form standard/how it is now do you, so you still need performance, you just dont need performance gains, an exhaust is an important part of a car/enginedanryan wrote:your post was hard to read properly... i doubt the bmw exhaust would last 20years. i dont need performance, just longativity
im sure there are plenty of good custom exhaust people out there who would disagree with you
custom stainless exhausts, are mostly performance gain thing arnt they ? they make it out of stainless but are often straight throughs with not much inner workings going on, which is also why they are louder and faster, and they wont have the inner engineering and workings of a standard bmw system
ask yourself this...why, if a standard and bmw Equivalent, but stainless, exhaust.. probably isnt made or avalable to buy anywhere ??
there are companys out there who provide these types of exhausts for classic cars, so it should be possible for mine.
just because the market would be small (me) doesnt make it a bad idea. i could get one made up for half the price of a bmw one and get a life time warranty.
you dont understand one thing- a 318iAuto touring is not a fast car, so whether its a copy, original bmw or custom built stainless exhaust so long as it fits and doesnt need replacing again thats all i want.
just because the market would be small (me) doesnt make it a bad idea. i could get one made up for half the price of a bmw one and get a life time warranty.
you dont understand one thing- a 318iAuto touring is not a fast car, so whether its a copy, original bmw or custom built stainless exhaust so long as it fits and doesnt need replacing again thats all i want.
-
Simon
- E30 Zone Team Member
- Posts: 14936
- Joined: Sun Jan 09, 2005 11:00 pm
- Location: South Wales
- Contact:
Got to agree on the standard BMW system, if you want standard looks, and standard sound you won't go wrong with a BMW boysen made system.
BMW didn't put the systems together just by putting a load of pipes and boxes together underneath an E30 in an hour or two.
BMW didn't put the systems together just by putting a load of pipes and boxes together underneath an E30 in an hour or two.
-
leeparkes
- Married to the E30 Zone
- Posts: 9538
- Joined: Thu Jan 03, 2008 11:00 pm
- Location: Black country
http://www.e30zone.net/modules.php?name ... 39&start=0polsta wrote:look up the pics someone posted of a standard bmw exhaust cut open posted the other day
Pics are half way down the page.
Cypriotgeeza wrote:I done both my mates in my old 318is
felt so proud,even tried it with a E30 325i and got put in my place..
-
rix313
- E30 Zone Team Member
- Posts: 4948
- Joined: Fri Oct 31, 2008 11:00 pm
- Location: Silverstone
- Contact:
Why do you specify not a performance one out of interest? If it's noise you're worried about they can be built to suit your requirements and be as noisey or indeed as quite as you want.
I'll speak to the lot up my way. I know they do discounts if a couple of you turn up together. They quoted me roughly £270 for a system for my car. What engine is it for?
I'll speak to the lot up my way. I know they do discounts if a couple of you turn up together. They quoted me roughly £270 for a system for my car. What engine is it for?
-
hongkongfuey
- Mad-tango-geezer
- Posts: 3304
- Joined: Fri Jun 08, 2007 11:00 pm
- Location: portsmouth
I have a long life powerflow exhaust, its the quietest stainless ive had, and half the weight of standard exhaust
if there wern't people like me,
with cars like mine,
who would you put down to make yourself feel better?
with cars like mine,
who would you put down to make yourself feel better?
its a m40 318 auto. non performance because i didnt want it any louder than standard. i just want it to look standard, with no rust in the future. i want to powdercoat the rear beam etc to have it look nice, and last longer so this is my reason for wanting stainless.
the sport stainless exhausts on an iS and 325i i understand these look good, sound great but performance isnt my thing with my 318 auto touring.
people may not see the point with what im trying to acheive with my car, but each to their own. some like to spend money on performance upgrades, engines etc. im just trying to get mine as mint as possible (in my eyes)
the sport stainless exhausts on an iS and 325i i understand these look good, sound great but performance isnt my thing with my 318 auto touring.
people may not see the point with what im trying to acheive with my car, but each to their own. some like to spend money on performance upgrades, engines etc. im just trying to get mine as mint as possible (in my eyes)