Christmas and E30 todo lists

[darkchild]

New fuel tank on Tuesday.

[maxfield]

My todo list is buy a house with a garage so I can my E30 in and do some work on it!

[DawieM3]

Put the M3 track car back together
Fit wiring harness
Fit dash
Fit seats & Belts
Fit glass
Paint bonnet, paint front & rear bumpers
Fit exhaust
Power up and run the engine

2nd job,

Strip and refresh a s14 for a client

3rd job,

Modify a e30 rear beam going into a 2002

4th job,

Continue with the speedboat rebuild, build front seats, rub boat down, fit engine, rebuild sterndrive, install sterndrive, boat electrics, get ready for summer

5th job

Start rebuilding the wife's 2002 with 2.8l m52 lump.

This little lot should keep me occupied for a while.


Merry Crimbo everyone.

[bss325i]

So, with this now in climate controlled dehumidified storage I've got to put my latest E30 back together while I'm off work over the winter break.



The plan is also to get the E34 M5 up and running.

Fingers crossed!

[jimbom30cab]

new inner and outer arch for the 318i

[MPOWERCRAZY]

My tech 1 convertible is parked up but hoping to collect some parts for the new year, the parts I'm hoping to source are a 6 branch manifold, 260 getrag gearbox and a clean rear top leather bench seat

My touring which I'm currently doing up has a few things i need to do in the coming week such as a engine service, source some bbs caps, refurb the wheels etc..

[aimlessrock]

Now that the back end of my cabby has been completely overhauled, all new rubber, new brake/fuel lines, drop links, rebuilt diff (thanks Gareth) im moving on to the front .

Plan is to take the wings and valance off, dash and interior out etc and have a good hunt for rust and then fully overhaul the front suspension and brakes.

I have lock up with power but if its to cold i will overhaul the front callipers and rebuilt with the new kit that arrived today from Bigred.

Just noticed my above post nearly a year ago (almost to the day)...the cabby has come along way since as i ended up removing the engine and dash owing to some rust holes on the bulk head that needed cutting out and new meatl welding in.

have a number of small jobs to do finish off but am aiming for summer 2016.

also need to find a med case 3.91 diff (open) as the 4.10 is still to high...pm me if anyone has one for sale.

[DanThe]

Who's having time off work then????

[pacerpete]

I'm going to finish fragging two 325 convertibles that have out stayed their welcome and do some final snagging on a very tidy 318 touring and get it advertised

[andyp]

I'm going to finish fragging two 325 convertibles that have out stayed their welcome and do some final snagging on a very tidy 318 touring and get it advertised

would that be my 318 auto low milage one ? which is all mot and taxed

[pacerpete]

I'm going to finish fragging two 325 convertibles that have out stayed their welcome and do some final snagging on a very tidy 318 touring and get it advertised

would that be my 318 auto low milage one ? which is all mot and taxed

No, my not so low mileage but quite minty alpine white turd that owes me -£100 all done, after a minor demorselling session

[Motorhole]

Not got a lot of time over Christmas - too busy at work to take extra leave, two families landing at once for a couple of nights...

But it would be nice to get the M52 that's sat in my garage down to its component parts ready for the M54B30 bottom end.