E30 shells from BMW

[DanThe]

Watch it Chris, or I will send spadge round

[SPADGE]

Watch it Chris, or I will send spadge round

[DanThe]

You seem to have let yourself go a bit spadge

[SPADGE]

You seem to have let yourself go a bit spadge

Some would say the opposite i suspect

[DanThe]

Which would mean you once looked worse than that?

I know your ginger but.......

[SPADGE]

Which would mean you once looked worse than that?

I know your ginger but.......

No it would mean i DO look worse than that

Less of the 'ginger' i'm an ex-strawberry blond

I used to use 'Head and Shoulders' but these days its just 'shoulders'

[e30m3s50b32]

There is an e30 m3 shell for sale , it comes with with a full DTM spec cage, rear arms and hubs, arches have been turreted to be able to run a low "DTM ride hight" and raised diff mounting. paperwork as well , its in primer and seems to be in good condition some glass is there, some pannel work is missing and will need finishing. £2500 on prep/paint should do it and source you the missing parts . then there's getting the looms and interior trim etc

The price is £5500 which is cheap, but it is essentialy a track/race car which could be street legal

[pacerpete]

It's not a dodgy patched up green one is it ?

[march109]

It's not a dodgy patched up green one is it ?

I think I know the one you mean

[Dave_M3]

Haha. Can I come too so, lol.


That's interesting about BMW going searching for you. They really wouldn't be bothered if it was a lost cause.
Ffs, they don't even go to the bother of looking for some parts that are being still made at times!

I'll have to settle for one or two door shells and a touring if I can't get my M3 I suppose

[e30m3s50b32]

here's the shell

http://www.s14power.com/classifieds/sho ... t=52&cat=8

[march109]

here's the shell

http://www.s14power.com/classifieds/sho ... t=52&cat=8

Thats a good find, definatly worth the money,

[Dave_M3]

Wow!

Thats not a shell, thats the makings of a race car!!!
Worth the money easily I think.

Thanks for the link though.
I have a template to work from now for my track car

[Hyperion]

speaking about shells, wasnt there a zoner from Sweden/Norway/somewhere, that got himself a 4 dr shell and built a race car with it...i cant remember the guys name unfortunately. it was a very cool thread.

[Chris-W]

speaking about shells, wasnt there a zoner from Sweden/Norway/somewhere, that got himself a 4 dr shell and built a race car with it...i cant remember the guys name unfortunately. it was a very cool thread.

Tom944 from the Netherlands?

[Jhonno]

speaking about shells, wasnt there a zoner from Sweden/Norway/somewhere, that got himself a 4 dr shell and built a race car with it...i cant remember the guys name unfortunately. it was a very cool thread.

Tom944 from the Netherlands?

Yup!

[Hyperion]

[maxfield]

[Jhonno]

Brand new M3 shell!! Nice!! Any info?

[maxfield]

I don't know much about it..

Jake on here will know about it though.

I remember a few years ago M3 shells being sold for ┚¬5000.

[Dave_M3]

That's a pretty cool suspension set up underneath it

[Dr Firefly]

That's a pretty cool suspension set up underneath it

Might be a bit bumpy on UK roads though. Must admit I'd never considered 8" wooden rims - could start a new trend...

[Dave_M3]

That's a pretty cool suspension set up underneath it

Might be a bit bumpy on UK roads though. Must admit I'd never considered 8" wooden rims - could start a new trend...

"Firm" would be the word for it I'd imagine