is this short shifter any good????
ebay no 7970374676
http://img140.echo.cx/my.php?image=shortshifter2jh.jpg
cheers Daz leeds
short shift?? any good??
Moderator: martauto
www.oldskoolfantasy.co.uk
in the shit,the one to blame,yeh its all my fault ;)
in the shit,the one to blame,yeh its all my fault ;)
-
ScottMc
- E30 Zone Regular
- Posts: 475
- Joined: Mon Jan 10, 2005 11:00 pm
- Location: Ayr (west of Scotland)
dunno if that particular one is any good but you can get a short shift cheap by using BMW Z3 parts from the main dealer. I had that setup on my e30s and it made a huge difference.
The part numbers etc are listed in the 'articles' section btw
The part numbers etc are listed in the 'articles' section btw
gone but not forgotten - Mtech 1 old skool 325i :: current rides- MR2 GT and 318i Touring 
-
Geeman
- Married to the E30 Zone
- Posts: 7641
- Joined: Sun Jan 09, 2005 11:00 pm
- Location: Grimsby, Lincolnshire
- Contact:
How much is it up at...?
Dealer supplied Z3 shifters are brilliant. I have the Z3 1.9 on the track car, and the even shorter Z3 2.8 lever on my Sport. It REALLY makes a HUGE difference! Well worth doing. Might even go for the super-short Z3M lever on the track car when the 3.5 goes in...
Giles.
Dealer supplied Z3 shifters are brilliant. I have the Z3 1.9 on the track car, and the even shorter Z3 2.8 lever on my Sport. It REALLY makes a HUGE difference! Well worth doing. Might even go for the super-short Z3M lever on the track car when the 3.5 goes in...
Giles.
how much is the z3 jobbie??
not really an essential item but would be nice to have a smooth and short gearchange interested in z3 as it keeps it all bmw Daz
not really an essential item but would be nice to have a smooth and short gearchange interested in z3 as it keeps it all bmw Daz
www.oldskoolfantasy.co.uk
in the shit,the one to blame,yeh its all my fault ;)
in the shit,the one to blame,yeh its all my fault ;)
http://www.e30zone.co.uk/modules.php?na ... echnz3.htm
Ԛ£56.34 listed there, but I imagine it depends on how well you know your Parts Dept at your local stealers:)
Ԛ£56.34 listed there, but I imagine it depends on how well you know your Parts Dept at your local stealers:)
'89 Touring - slightly rippled with a rusty underside
'94 e36 tree climber
'94 e36 tree climber
-
Geeman
- Married to the E30 Zone
- Posts: 7641
- Joined: Sun Jan 09, 2005 11:00 pm
- Location: Grimsby, Lincolnshire
- Contact:
Nooooooo...
The bits that are the same on EBay are Ԛ£27.66 and Ԛ£4.68 - the lever and bearing. You need nothing else really.
The rest of the stuff listed is to replace the selector rod union, which gets rid of the slop, where as this lever makes the throw shorter, the same as the lever that's advertised on Ebay...
Hope this helps...
Giles.
The bits that are the same on EBay are Ԛ£27.66 and Ԛ£4.68 - the lever and bearing. You need nothing else really.
The rest of the stuff listed is to replace the selector rod union, which gets rid of the slop, where as this lever makes the throw shorter, the same as the lever that's advertised on Ebay...
Hope this helps...
Giles.
cheers geeman
so where the cheapest place to get the lever and bearing?? cheers Daz leeds
so where the cheapest place to get the lever and bearing?? cheers Daz leeds
www.oldskoolfantasy.co.uk
in the shit,the one to blame,yeh its all my fault ;)
in the shit,the one to blame,yeh its all my fault ;)
The bits that are the same on EBay are Ԛ£27.66 and Ԛ£4.68 - the lever and bearing. You need nothing else really.
lol sillycheers geeman
so where the cheapest place to get the lever and bearing??
How low can u go
-
Ziggy
- E30 Zone Team Member
- Posts: 11534
- Joined: Mon Jan 10, 2005 11:00 pm
- Location: floating round my tin can...
From your friendly neighbourhood $tealer...dazleeds wrote:cheers geeman
so where the cheapest place to get the lever and bearing?? cheers Daz leeds
E30 in need of wiring loom smoke since April '11...
if you want the daddy of all shortshifts then you want to get the B&M Shortshift, i have it fitted to mine and to be honest i forgot how good it really was until i was at the lakeside meet watching from outside my car at others playing with the shortshift, even someone who had done the z3 conversion said that it was a much shortershift with the B&M, there not cheap at about Ԛ£130 but if you think about how many times you change gear, you soon get your moneys worth 
-
Geeman
- Married to the E30 Zone
- Posts: 7641
- Joined: Sun Jan 09, 2005 11:00 pm
- Location: Grimsby, Lincolnshire
- Contact:
Dale... that's because everyone uses the Z3 1.9 lever. I've got the Z3 2.8 lever in mine and it's a much much shorteer shift than the 1.9 lever I have in my track car. I might even go for the Z3M lever next, it's even shorter again!
They're all roughly the same price too.
Giles.
They're all roughly the same price too.
Giles.
[img]http://
