BMW Badge on Bonnet

[Car-Nut]

Mines looking a bit old....... as it is

Where can I get new one?

[Theo]

BMW

[Rosc0PColtrane]

Dealer?

I hear they pop off quite easily.

New badge, new clips pop back on.

Think there's a couple zoners who know of a good trick to get the roundel off safely.

[Car-Nut]

Cheers Theo......

I thought some one might know a cheap place though dont know what BMW charge .

[d6dph]

Really not expensive at the dealers, Think they are around £10.

Held in by two pegs on the back of the badge which push into rubber grommets in the bonnet, I put a couple of blobs of dum dum on the back to make sure it sits nicely and doesn't rub the paint below.

[everhard]

TRY FLEA BAY IVE SEEN THEM ON THERE BEFORE PRETTY CHEAP IF I REMEBER RIGHTLY!

[Theo]

I think they are about a 10er from the dealers.

[Chris-W]

£12.56 last one I bought.

[jcjdavis1]

Hi ECP less than a tenner.Try putting fishing line under old badge to help ease out.

[munky30]

I used a screwdriver to lever mine out from the top. It snapped in half.

[gra325i]

course, you can always open the bonnet and push the pins out from under the bonnet, thus avoiding any damage to exterior surfaces cheap badges ime are always plastic and the finish doesnt last 2 minutes..neighbour just paid £14.35 for genuine badge from dealer in Dundee

[gazza]

you must be very lucky as my bonnet is double skinned and you cant get near the badge

[gra325i]

ive got three e30s and i can get to them all??? weird eh?

[peejay]

ive got three e30s and i can get to them all??? weird eh?

That is wierd, i have swapped and changed badges loads of times never seen the pins through on the inside of the bonnet before....?

[gooner1]

On my bonnet where the badge sits it has four holes for the badge pins but have yet to find a badge with four pins

[mrLEE30]

all my E30's i ever owned including here and in uk allow the badge to be pushed out from inside the bonnet.

failing that (and when you want to remove the boot badge where the inside is not reachable due to double skin) use string underneath and pull it upwards (may help to use two pieces top and bootom half of the badge)

Munky30 you are clearly a bit of an animal, do you live anywhere near Sparkwell Animal Santuary/park??

[munky30]

I took it out with the intention of smoothing the recess and respraying the car... had I been doing it to replace it I would have been a tad more delicate.

[Jay07]

I cant get access to the pins from under the bonnet! Had to pry it off! 11 squid for a new one...same with the boot but that one came off easy....the bonnet badge was a b!tch!

[zimmerbimmer1]

PM sent

[gra325i]

ignore the rust (being dealt with soon) but if you look you can see the silver pins poking through the black gromits that hold them in place

[peejay]

Ok Gra, I see it now.

First time though!

[Rosc0PColtrane]

Useful photo mate. Good effort

[cliffybabe]

when i remove dmy front emblem i drilled a small hole intot he surface of the badge then put a screw into it and pulle dit off using the screw

[Rosc0PColtrane]

when i remove dmy front emblem i drilled a small hole intot he surface of the badge then put a screw into it and pulle dit off using the screw

Over engineered!!

Cool though!!

Cliffy, how about a chrome roundel with the letters and the rotors etched or embossed onto it???

Reckon would be just the thing for your car!! Oh and chrome those tech 1 side skirts, you know it makes sense!

[gra325i]

Over engineered!!

in true bmw style eh?

[cliffybabe]

when i remove dmy front emblem i drilled a small hole intot he surface of the badge then put a screw into it and pulle dit off using the screw

Over engineered!!

Cool though!!

Cliffy, how about a chrome roundel with the letters and the rotors etched or embossed onto it???

Reckon would be just the thing for your car!! Oh and chrome those tech 1 side skirts, you know it makes sense!

watch this space, There alreayd a new badge on order