quick wheels q?

[Rich320I]

would et 30/35 wheels fit an e30 or is the offset to much?

any advice is really appreciated

[Chris_B86]

May cause clearance issues on the inside of the wheels and they'll sit in too far. 10-15mm spacers should do the trick

[Rich320I]

many thanks, iv got some hubcentric spaces 10mil.

whats the standard offset on bbs wheels out of interest?

[j2b]

bbs are et24 i think

[Chris_B86]

that sounds about right, the wheels in my sig are 7.5j et20 if that helps

[Grrrmachine]

Original bottletops are ET35:

http://www.e30zone.net/e30zonewiki/index.php/Wheels

[Rich320I]

cheers for all the info chaps, i think il give the wheels in q a go then

[capnmchl]

14" BBS are ET30.

[mick_318is]

I have 16"x 7 ET30 MIM's on at the moment with 205x50 tyres. They fit without any spacers.

Depends on what width they are as well.

On a previous car I had 16" x 7 ET 35 that needed a spacer on the front to clear the strut.

[Rich320I]

the wheel size is 16" x 7.5, et 30 and et 35 2 of each

looking through seems as though they may fit (just)

[Chris_B86]

I'd put your spacers on anyway, just to fill the arch a touch

[Rich320I]

think itl be a case of try and see how they sit in the arches first bud, the rear of mine is -80 mill so they need to sit inside the arches anyway, some tinkering at the weekend awaits

[verde]

ET 30 9Js need 5mm spacers front to clear the struts...5mm minimum as they clear by a baw hair.