Gearbox number help ASAP please
Moderator: martauto
- 318isturbo
- E30 Zone Regular

- Posts: 262
- Joined: Thu May 25, 2006 11:00 pm
- Location: essex
Hi guys I'm at a scrap yard has anyone got a idea of what engine this gearbox number is from 240.0.0370.90
Any ideas maybe 318i
Any ideas maybe 318i
That's just the casting number which could relate to anything from an E30 318i to an E28 520i.
You need the serial number - it's stamped into the bellhousing around the edge. Clean the edge of the box right up and you'll see it - numbers followed by three or four all important letters. Get that, and I can tell you what it is.
You need the serial number - it's stamped into the bellhousing around the edge. Clean the edge of the box right up and you'll see it - numbers followed by three or four all important letters. Get that, and I can tell you what it is.
-
Grrrmachine
- E30 Zone Wiki / Team Member

- Posts: 8043
- Joined: Sat Feb 09, 2008 11:00 pm
- Location: Warsaw, Poland
'89 325i Touring | Touring Resto Thread | In-Dash Screen install
-
Grrrmachine
- E30 Zone Wiki / Team Member

- Posts: 8043
- Joined: Sat Feb 09, 2008 11:00 pm
- Location: Warsaw, Poland
Read the bit under the table, Andy 
'89 325i Touring | Touring Resto Thread | In-Dash Screen install
I did, and there are two glaring errors.
The table lists the letters, but doesn't say which cars or engines they fit.
And the M10/M40-42 boxes will not iterchange at all. Nothing to do with the angle the unit sits at - the bolt spacing is different so an M10 box will not physically bolt to an M40 or M42 engine.
The table lists the letters, but doesn't say which cars or engines they fit.
And the M10/M40-42 boxes will not iterchange at all. Nothing to do with the angle the unit sits at - the bolt spacing is different so an M10 box will not physically bolt to an M40 or M42 engine.
-
Grrrmachine
- E30 Zone Wiki / Team Member

- Posts: 8043
- Joined: Sat Feb 09, 2008 11:00 pm
- Location: Warsaw, Poland
Ahhh, ok. I'll make those amendments ASAP then. Cheers 
I'll add info regarding which 'box codes fit each car when I find them; I don't think the Restoration Bible has them either.
I'll add info regarding which 'box codes fit each car when I find them; I don't think the Restoration Bible has them either.
'89 325i Touring | Touring Resto Thread | In-Dash Screen install
Oh it does.Grrrmachine wrote: I don't think the Restoration Bible has them either.
LF = four speed 242, 316 M10
MN and BMV = 5 speed 240, M10 carb
MD and BMU = as above, 318i M10
BMO, TBCU and BCX = 5 speed 240 , M40 and some 318iS
BCO, BCP, BCT = 318iS and E34 518i (pre 1992 overdrive). These boxes are the longer units with the shorter prop.
-
Grrrmachine
- E30 Zone Wiki / Team Member

- Posts: 8043
- Joined: Sat Feb 09, 2008 11:00 pm
- Location: Warsaw, Poland
Great stuff 
'89 325i Touring | Touring Resto Thread | In-Dash Screen install
What would 001612 ANB be please Andy?
-
Grrrmachine
- E30 Zone Wiki / Team Member

- Posts: 8043
- Joined: Sat Feb 09, 2008 11:00 pm
- Location: Warsaw, Poland
ANB is a Getrag 260, although no idea which model it is.
'89 325i Touring | Touring Resto Thread | In-Dash Screen install
- 318isturbo
- E30 Zone Regular

- Posts: 262
- Joined: Thu May 25, 2006 11:00 pm
- Location: essex
Thanks guys been a busy day today forgot about the gear selector being different sizes lol
Great help from you guys about the box many thanks
Great help from you guys about the box many thanks
Was hoping you were going to say it was a sport boxAndyboy wrote:Standard 325i box.Kedge wrote:What would 001612 ANB be please Andy?
-
daimlerman
- **BANNED**
- Posts: 15968
- Joined: Mon Feb 27, 2006 11:00 pm
- Location: Grumpy Old Man
Wonder who wrote the Restoration Bible?Grrrmachine wrote:Ahhh, ok. I'll make those amendments ASAP then. Cheers
I'll add info regarding which 'box codes fit each car when I find them; I don't think the Restoration Bible has them either.
-
Grrrmachine
- E30 Zone Wiki / Team Member

- Posts: 8043
- Joined: Sat Feb 09, 2008 11:00 pm
- Location: Warsaw, Poland
Oh I know, I knowdaimlerman wrote:Wonder who wrote the Restoration Bible?
So far...
'89 325i Touring | Touring Resto Thread | In-Dash Screen install
-
daimlerman
- **BANNED**
- Posts: 15968
- Joined: Mon Feb 27, 2006 11:00 pm
- Location: Grumpy Old Man
You would be well advised to take facts from the 'Bible',expanded with practical detail from forum members.Bear in mind that there may well be a copyright issue,but Andy will be approachable about that sort of thing!Grrrmachine wrote:
Oh I know, I knowSometimes it's tempting to copy page after page of the Bible into the Wiki, the info in there is so good. But so far I've resisted that temptation.
So far...
-
Grrrmachine
- E30 Zone Wiki / Team Member

- Posts: 8043
- Joined: Sat Feb 09, 2008 11:00 pm
- Location: Warsaw, Poland
So far I'm taking the approach that the Wiki is a Zone product, so it must be based primarily on data posted or created on the Zone. If there's an article on another site, I always ask permission first.
It's not right to just lift data from other sources, especially ones people have spent their own time and energy on with the aim of financial gain, so I'll only post Bible stuff that Andy himself has volunteered on the site.
It's not right to just lift data from other sources, especially ones people have spent their own time and energy on with the aim of financial gain, so I'll only post Bible stuff that Andy himself has volunteered on the site.
'89 325i Touring | Touring Resto Thread | In-Dash Screen install


