Can you put any e30 springs on a touring
Moderator: martauto
-
BadDave
- E30 Zone Team Member

- Posts: 6012
- Joined: Sun Jan 09, 2005 11:00 pm
- Location: Nr Aberdeen.Scotland(Gods country)
The fronts are the same as there respective 2dr/4dr & cabby counterparts.
Rears are different,although you can get away with using cabby ones on the back of a tourer if you can't find any tourer specific ones.
Rears are different,although you can get away with using cabby ones on the back of a tourer if you can't find any tourer specific ones.
Alpina B10 3.2L #187 (1 of 64 brought into the UK)
2.8L turbo build thread(work in progress)
http://www.e30zone.net/modules.php?name ... 27#1268227
2.8L turbo build thread(work in progress)
http://www.e30zone.net/modules.php?name ... 27#1268227
-
HairyScreech
- Engaged to the E30 Zone

- Posts: 6265
- Joined: Sun Jan 21, 2007 11:00 pm
bassically, any e30 spring will fit and work if your at a loose end but they wont be "right"
for the front of any e30 you need to pick 4 pot or 6 pot depending on which engine is in it, so 6 pot saloon fronts and 6 pot touring fronts are the same,
the rears are dependent on body style, as cabriolet and touring springs are harder for the extra 60-80kg over the back end.
its not a lot, all it dose is make the car about 15-20mm up or down, but the rate of the spring never ramps up properly, so the car handles badly.
for the front of any e30 you need to pick 4 pot or 6 pot depending on which engine is in it, so 6 pot saloon fronts and 6 pot touring fronts are the same,
the rears are dependent on body style, as cabriolet and touring springs are harder for the extra 60-80kg over the back end.
its not a lot, all it dose is make the car about 15-20mm up or down, but the rate of the spring never ramps up properly, so the car handles badly.
2.8 development thread http://www.e30zone.net/modules.php?name ... c&t=170822
m3.3.1 m20 thread - now running, chip needed - any volunteers?
http://www.e30zone.net/modules.php?name ... =viewtopic&
m3.3.1 m20 thread - now running, chip needed - any volunteers?
http://www.e30zone.net/modules.php?name ... =viewtopic&
-
Simon
- E30 Zone Team Member

- Posts: 14936
- Joined: Sun Jan 09, 2005 11:00 pm
- Location: South Wales
- Contact:
I've got springs from an E30 saloon on the front of mine, and E30 M3 standard springs on the rear.
Did try saloon springs on the rear before the M3 ones, just to see what it would actually drive like...don't even bother.
Did try saloon springs on the rear before the M3 ones, just to see what it would actually drive like...don't even bother.


