Tolerence Question of sorts....!

General E30 related discussions -
Please put technical questions in E30 Tech Help forum below

Moderator: martauto

Post Reply
User avatar
roy46ss
E30 Zone Newbie
E30 Zone Newbie
Posts: 84
Joined: Thu Jan 10, 2008 11:00 pm
Location: Co. Louth, Ireland

Fri Nov 27, 2009 1:00 am

Hi

Will a scorpion exhaust system from a cab 325 fit my 2dr 320 (both have dual pipes from the manifold back)..?
Same for the traling arms and rear lights, engine, box and lsd....?
I'm sure the enging box and diff will fit no problem but just checking.

Also any ideas what an E30 325 cab is worth for parts just looking for a bal park figure really.

Thanks
`91 320i se, `94 Audi S2 Avant 288WHP, `12 Golf GTD
DavieP
E30 Zone Regular
E30 Zone Regular
Posts: 731
Joined: Wed Aug 01, 2007 11:00 pm
Location: South Devon

Fri Nov 27, 2009 8:03 am

The exhaust will definitely fit if you're doing a complete replacement inc. down-pipes. Both engines use the same exhaust manifold, but past the flange it seems that the 320 front pipes are slightly different. Engine and running gear will also fit, but springs and dampers are rated for the heavier cab and could cause the saloon to ride a bit higher. Seems a bit odd to cannibalise a 325i cab for a 320i unless the cab is otherwise fubarred?
Dave in Torquay

Image
User avatar
roy46ss
E30 Zone Newbie
E30 Zone Newbie
Posts: 84
Joined: Thu Jan 10, 2008 11:00 pm
Location: Co. Louth, Ireland

Fri Nov 27, 2009 2:13 pm

Its just because the cab is rotten and the 320 has the m-tech 2 kit and interior from factory bar the black roof lining and more importantly its a very clean shell only down side is it wouldn't pull the skin off a rice pudding...
`91 320i se, `94 Audi S2 Avant 288WHP, `12 Golf GTD
Post Reply