central scotland scrappie

Tue Mar 11, 2008 5:25 pm

as above theres 3 tourings 2 two doors and 1 four door e30s in a scrappie locsal to me if any ones wanting more info please ask. 1 of the 2 doors is a prefacelift rear bumper is shot.. front bumper is in good nick but has tech1 skirt on it. the facelift 2 door is white 320 auto the prefacelift is a black one but theres no body panels left on it ( ive allready blagged the good ones off it for mine ) theres also a e28 and loads of e36s extra any one want more info im going to be going back up tomoro to get an engine for my other halfs cabbie

Tue Mar 11, 2008 5:28 pm

is that SCB

Tue Mar 11, 2008 5:28 pm

sounds a good find, bit too far for me though mate

Tue Mar 11, 2008 5:34 pm

Sanchez wrote:is that SCB

nope one over my way just outside denny

Tue Mar 11, 2008 5:34 pm

stevotheevo wrote:sounds a good find, bit too far for me though mate

if your needing anything im happy to strip it off and send it down to you

Tue Mar 11, 2008 5:38 pm

jbh wrote:
stevotheevo wrote:sounds a good find, bit too far for me though mate
if your needing anything im happy to strip it off and send it down to you

very kind of you mate, what im searching for is drivers side recaro, seem a bit thin on the ground at the moment.
probably a bit large to post though.

Tue Mar 11, 2008 5:39 pm

hows the apline white II bonnet?

Im wanting a cheap mint one. SCB didnt have any E30's last time i was up there.

The one i have needs a repsray but if i can sauce another one ide be happy.

Tue Mar 11, 2008 5:40 pm

Sanchez wrote:hows the apline white II bonnet?

Im wanting a cheap mint one. SCB didnt have any E30's last time i was up there.

The one i have needs a repsray but if i can sauce another one ide be happy.

ill have a look for you tomoro bud ill even get a pic of it for you. as i say im going up to strip an engine out tomoro

Tue Mar 11, 2008 5:40 pm

stevotheevo wrote:sounds a good find, bit too far for me though mate

have you been to pease pottage?

Tue Mar 11, 2008 5:43 pm

jbh wrote:
Sanchez wrote:hows the apline white II bonnet?

Im wanting a cheap mint one. SCB didnt have any E30's last time i was up there.

The one i have needs a repsray but if i can sauce another one ide be happy.
ill have a look for you tomoro bud ill even get a pic of it for you. as i say im going up to strip an engine out tomoro

Cool thanks, im also needing a front lower valance as mine is push back on the drivers side. I would come and help but im working. Ill be off next Monday and tuesday if any of the parts are good.

Cheers again

Tue Mar 11, 2008 5:45 pm

Sanchez wrote:
stevotheevo wrote:sounds a good find, bit too far for me though mate
have you been to pease pottage?

i have indeed, how do you know of such a place from up there

Tue Mar 11, 2008 5:47 pm

im english and was brought up in Redhill. If you see a 320 f reg red cabbie its my dad.

Tue Mar 11, 2008 5:49 pm

Sanchez wrote:im english and was brought up in Redhill. If you see a 320 f reg red cabbie its my dad.

surrey don't you know. if i see it, i'l give him a wave

Tue Mar 11, 2008 5:59 pm

stevotheevo wrote:
Sanchez wrote:im english and was brought up in Redhill. If you see a 320 f reg red cabbie its my dad.
surrey don't you know. if i see it, i'l give him a wave

Thu Mar 13, 2008 7:50 pm

jbh wrote:
Sanchez wrote:hows the apline white II bonnet?

Im wanting a cheap mint one. SCB didnt have any E30's last time i was up there.

The one i have needs a repsray but if i can sauce another one ide be happy.
ill have a look for you tomoro bud ill even get a pic of it for you. as i say im going up to strip an engine out tomoro

was just wondering if you went?

Mon Mar 17, 2008 10:45 am

there is an m50 powered touring sittin in the back corner of the scrappy at my end, engine looks well clean unknown why it in the scrappy, unfortunately its in the hardest to reach area and doubt it would be possible to get it out of the scrappy.

Tue Mar 18, 2008 1:35 am

2.5 m50 maf james the 6 pin jobbie as im still after one?

Tue Mar 18, 2008 1:38 am

i looked in every one for you bud no joy if there had been one there i would have called you before now

ive not had chance to get back up to get a look at the bonnet for you. i should be up before the end of the week but there not going nowhere

Tue Mar 18, 2008 1:46 am

thanks anyway mate.

its a bootlid not a bonnet im after, a non spoiler one if i can get it but i will fill one in if its clean though.

im hopefully going to be moving in the next few weeks so i will hold off getting that middle section off you untill i move then get a courrier to pick it up if thats cool with you.

im going to be having another clearout in the garage and my shed shortly to get rid of stuff i dont need so there will be a load of various m20 parts kicking about if you want them as they will end up in the bin otherwise.

i will have a look and let you know whats there.

Tue Mar 18, 2008 10:38 am

that will be cool wullie. so where you moving to?

I'm sure me and Gordon could get the middle section over to you if need be wullie

Tue Mar 18, 2008 11:33 am

hi

im hopefully moving to hamilton and i will know for definate by the end of the week.

if you could get over this way with gordon that would be great as it would save the hassle of using a courrier and you could pick up whatever spare parts i have at the same time.

Tue Mar 18, 2008 11:51 am

not a problem bud.

im still on the look out for a bootlid without holes for you aswell but no joy yet

Tue Mar 18, 2008 12:40 pm

need a 325 exhaust system,and rear doors for a 4 door,if you could have a look cheers bud

Tue Mar 18, 2008 1:09 pm

got a complete 325 system here and ill have a look at the doors on the one up in the scrappie for you. where are you located about pete ?