E30 Zone

You have Tony and Barney Halse to thank for that. Indeed. Old single row chains (think E12 5 series) did have a recommendation for 100K AFAIK BMW themselves don't even have a recommended change date for the Duplex type. IIRC It's either the same part number or same design as the chain used on all t...

bss325i wrote:You have Tony and Barney Halse to thank for that.

Don't forget Nigel Moseley, not only has he been claiming since the mid 90's that E30 M3's need the timing chain replaced at a 100k but also that E36 M3's do as well.

Jack fixture 41 35 1 913 759 number 9 on here, no idea if it's still available though.

Single components for body-side frame - BMW parts catalog

You'll find all the alignment spec's here

http://www.bmwtechinfo.com/repair/main/941en/index.htm

As far as I know it's just a draught excluder on all of them it just newer bmw's have it stuck to the roof, if the stick on one's are the same thickness it should do the same job. The sunroof I'm replacing has a lot of rust under the seal, so eliminating the u bend of the e30 seal which could hold w...

Has anyone fitted a sunroof seal off of a newer bmw where they are stuck to the roof instead of pushed onto the sunroof, as they are a lot cheaper than the e30 one. And I wouldn't be surprised if the standard seal is at least partly responsible for the rust problems.

Can I get a price for this please

54 12 8 169 710

thanks

Hate to disagree, but the mirrors can come apart. If you take a large drill bit(10-12mm) and drill the top of the melted plastic rivets this will leave a stub of plastic with a 3mm hole down the middle. You can then take the mirror completly to bits and paint the individual parts. When you need to ...

would't drilling the plastic where it's melted to the metal separate them then you could just bond the plastic back on to the metal when you've painted them.

I bought a part from them when it hadn't turned up the following week I phoned them and nigel said he had sold it to someone else, when I asked him why he said that's business it happens all the time, I'm guessing the other person offered him more so he sold it to them after agreeing to sell it to m...

If this is the case I'm happy to eat my words - but the roller blind mesh looks like shite fishing net. Anyway, I've already decided to put the speakers into my Blue shelf so the whole sordid affair is over. If it looks that bad then it probably isn't a bmw one as my old car had a retrofit one and ...

bmw did two blinds one was a retrofit one and one was built in to the shelf, see pics below. http://static.bmwfans.info/images/epc/NjQ1N19w.png Rear window shelf/sun blind - BMW parts catalog http://static.bmwfans.info/images/epc/NjQ2NV9w.png Rear window shelf/sun blind - BMW parts catalog

Get yourself some citric acid and follow the instructions for deox-c, same results just cheaper.

adit you have a pm

Can you give the prices for the following parts, thanks.

41 13 1 962 653 x1
41 32 1 959 590 x1
41 11 1 913 088 x1
41 35 1 935 898 x1
41 34 1 959 874 x1
41 35 1 945 820 x1
41 35 1 976 051 x1
41 35 1 976 052 x1
41 35 1 976 055 x1
41 35 1 976 056 x1
54 12 1 906 710 x1
54 12 1 903 725 x1

So does nobody have any idea about this then, with how easily mine broke I would of thought those that have had a respray must of replace it.

I could be wrong but I think that's the part that the side grills screw in to at the bottom. Anyone know if part 15 is the same? I can't check as I don't have it on my car.

Does anyone know if there is a part number for the plastic grommet type thing that the kidney grill pushes in to at the top?

Thanks

Falkster wrote:Or I could be a little less thick and just google it!!! Just found a company than deliver next day for £86....thats halved the ebay price!!

Where's that from, if you don't mind me asking.

I need a new fuse box bracket but can't see it listed on the etk, so I'm assuming it comes attached to the panel. If you are able to find it listed separately can you quote me for that if not the panel is

Heater closing panel 41 13 1 955 930.

Chassis no. ae40573

Thanks

Rich_W wrote:
GC318 wrote:

Then wait till you realise that £1180+Vat is over twice what another specialist (with a better rep) would have wanted for a full rebuild!

Just out of interest who was the other specialist?

Looking good, but why is it in bits? Flicked through PBMW the other day they had a feature (re Advertisement) for these c_u_n_ts! :roll: Notice how they glossed over the 100K chain thing or any of the other BShittery they've mugged customers on! I heard ml had been taken over by new management, if ...

Thanks I'll add it to the list I'm making.

O oh, you've triggered my curiousity and Ive started browsing and so far its advised to yous zinc primer on welds and etch primer on bare shell, as etch primer sticks to the shell of the car where as the zinc primer lays ontop of it. :? Like you I was going to use zinc primer but then I started rea...

Do you sell seam sealer in tubes?

Thanks

I was hoping for a few more responses but thanks.

I've decided it's time to sort some surface rust on my car, the thing I need to know is should I use zinc primer or self etching primer on the bare metal? I've been looking at loads of restoration threads on here and other forums and while you get lots of people saying they used zinc primer to stop ...

I need the following parts. M3 vin ae40573 11 76 1 308 686 x2 exhaust gasket 07 11 9 913 855 x3 exhaust bolt 07 11 9 913 859 x1 exhaust bolt 18 30 1 737 774 x3 exhaust nut e30 convertible 72 11 1 847 480 x2 Seat belt bush z3 1.9 32 11 1 137 132 x2 steering rack boot tension strap Thanks Paul

Hmm there seems to be some discrepancies between my data and yours Henry, unless I'm converting minutes / seconds to degrees incorrectly! http://ee1394.com/bmw/docs/factory/repair/en/tdata/images/0211.jpg http://ee1394.com/bmw/docs/factory/repair/en/tdata/images/0212.jpg does anyone know how to mak...

I never understood having fog lights on when it wasn't foggy as all the ones I've ever had did nothing to help you see where you was going, the only time I thought having lights in the bumper was useful was on my 205 as it had driving lights which came on with the main beam. If you think people havi...

I thought people use to say they were free from dealers if you showed your log book.

Thanks, I'll see what it looks like when I remove it before buying a new one then.

Does anyone know how often the power steering reservoir is meant to be replaced as I would of thought the filter inside needs replacing at some point like any other filter.

Paul

zimmerbimmer1 wrote:Hi There,

Ã‚£29.08

Thanks I'll let you know.

Can you give me a price for the power steering reservoir for ae40573

Thanks
Paul

Search found 39 matches

Re: M3 1 OF 148 RARE

Re: M3 1 OF 148 RARE

Re: Sill rust - REAL jacking point?

Re:

Re: alternative sunroof seal

alternative sunroof seal

e38 parts price

Re: Mirror dis-mantling

Re: Moseley Motorsport opinions please?

Re:

Re: Cleaning rust off parts

Re: sunroof?

body panel prices

Re: Part number help

Re: Part number help

Part number help

Re: M3 radiator

Price please

Re: New Evo II

Re: New Evo II

Re: Seam sealer

Re: A question for the bodyshop guy's

Seam sealer

Re: A question for the bodyshop guy's

A question for the bodyshop guy's

Some prices please

Re: M3 SUSPENSION SETTING

Re: Front Fog Lights. "WHAT'S THE BIG PROBLEM ???"

Re: bonnet badge e30

Re: Power steering reservoir filter

Power steering reservoir filter

Re: Power steering reservoir

Power steering reservoir