E30 Zone

Think if found my problem. That blue loctite doesn't actually work(cheap unknown brand)
Tomorrow if it doesn't rain I'll REAL loctite them in place with my new bolts.
And the problem will be sorted alongside my new throttle cable. Maybe a fresh magic tree too.

These are the studs. They have tj go through the throttle body into the heater plate then into the manifold
There's not much thread to work with

martauto wrote: ↑
Sun Dec 19, 2021 2:32 pm
Lock two nuts on one end and tighten the studs into where they should be .
These wont move or undo when tightening up the nuts.

Mart.

There too short they'd screw pretty much all the way in until there's no thread left, so I can't, that's why I'm using thread locker

Well if you don't loctite them, they'll just unscrew as you do the nuts up. Or we're my studs shrunk or the manifold got that much bigger
How hot does the throttle body area get?

Got some now do I use my red llctite and put them in or what?
Have the original ones in there but they seemed so loose as I was changing the hoses I thought ide change them, do I loctite the new ones in to hold them still while I do the throttle body up or some other way.

Ordered

Can I get throttle cable and the studs please

In the morning I'll order them

Can I get the price of 4 throttle body studs number 07129904546
Mine seem to have shrunk ? Almost loctited it and then added the heater plate and throttle body to find it way too short to get a bolt on.

Have you checked the small brass nut behind the cluster to earth the gauges ? DC can play wierd tricks even when you have not touched something :mad: :mad: Mart. I haven't I'm afraid It's too cold ATM, The rest works so that will have to do until a next warm day or warmish this is Britain. Got me t...

My heating is back as usual
Checked my fuel level sender was plugged in,
It was

I gauruntee it was working before, would a fuel leve senderl go bad? Maybe I handled it to rough or something

Alternator seems to be charging

Cheeky pic of the belts
Plus my Fannymould

Number 12

Sounds like you also done it.

What no tunks from the airbox to the light ?
Might have the plastic bit

91 318is
13711727094
13711727097

Also how much for the tiny end piece of the throttle cable, the piece that screws into the throttle body for fine adjustments.
Square picture
Also how much for the rubber end piece that covers the nipple on my throttle body.
Arrowed in picture

Fired her up today and all was good except for some reason my fuel gauge lifts just off empty and then nothing no light nothing. Car reached half the temp gauge and I had a working heater fan but no heat? It was blowing cold but not freezing and I let it run a good 15 mins. Could be because it was o...

Tomorrow getting some coolant and then I'll run her and see what results I get. Hopefully all is well.
The power steering belt looked good and strong but the alternator belt was shot.
Renewed them then tomorrow I'll get some antifreeze and run her up.
Hopefully all goes well.

Found these 2 belts in my engine bay.
I got some more to renew but I forgot the pictures

Waiting on ecp delivery
Threw another 5L into the tank I had from Mx.

Would that allow it to show my fuel gauge when it's not running ?
Either way I need both new belts so there next on my list

Ok Iv got a car had for years Getting it back all sorted Anyway cut the story short the alternator light is on (battery light), belt must of stretched while it was sitting there. Gonna grab a new one in the morning, I'm wondering does a feature of alternator not charging , mean you also lose the rpm...

Nuts not bolts

4 of 07129904553
The bolds to hold the throttle body on a 91 318is

Ordered

07129905541
Enough for the top half of the manifold, that's around 6 please.

11151717858
Please
318is 1990 production year.

Think Iv got it, rocker cover breather to throttle body gold nipple iv coloured in orange
And the blue dot up to the trunk and the other end to the icv.
Last thing I want is it filling up with water where it shouldnt.

Started ripping them out and we'll I'm stuck now what goes on the other end of the fuel rail pressure regulator where's the nipple it goes on to it's on the throttle body I'm just not sure which?
Also what goes to these hoses real OEM doesn't really show.

Turns out it came Monday
I'll fit tomorrow hoping it doesn't rain

Ordered

I'll ring up when I'm back from the gym

My top hoses seem ok how much without
11531717620
11531717622

Search found 64 matches

Re: Manifold/throttle body studs

Re: Manifold/throttle body studs

Re: Manifold/throttle body studs

Re: Manifold/throttle body studs

Manifold/throttle body studs

Re: Price please

Re: Price please

Re: Price please

Re: Price please

Re: Alternator not charging

Re: Alternator not charging

Re: Alternator not charging

Re: Alternator not charging

Re: Price please

Re: Alternator not charging

Re: Price please

Price please

Re: Alternator not charging

Re: Alternator not charging

Re: Alternator not charging

Re: Alternator not charging

Re: Alternator not charging

Alternator not charging

Re: Price please

Price please

Re: Price please

Price please

Price please

Re: M42 Fitting hoses today

Re: M42 Fitting hoses today

M42 Fitting hoses today

Re: M42 coolant hoses

Re: M42 coolant hoses

Re: M42 coolant hoses

Re: M42 coolant hoses