Hey guys Recently done the 5 stud conversion on my e30 consisting of 318ti compact rear beam and e36 m3 Evo front hubs/breaks My questions being; When buying coilovers am I right in saying I can just buy a set for an e36 m3 Evo and they will fit both the front hubs and the rear or do I have to mis m...

sup guys i got a e30 2.7l stoker got the kassel 2.7l Stroker Tune for it and as soon as i installed it. (correctly i triple check it) it started to have idle problems where it idles at 400-500 which the tune said it's supposed to dump idle to 900. when it gets warm enough it bumps it to "normal idle...

Hi, this may have been asked before but can’t find anything on a search.
All my windows are very slow to go Down and need help to come back up, the car is a 4 door 1987 325i with 43k so has not had much use.
What’s the solution please? VidMate Mobdro

I am in the beginning stages of planning an ev swap e30 build. I am thinking I will use an m52 5 speed and stock diff/rear. I would be making an adapter plate to connect an ac motor to the transmission effectively replacing just the engine and the rest of the drivetrain would remain the same. I'm cu...

Heya everyone, I’m going to be picking up my first E30 325i sport next week hopefully, (pictures will soon to follow :D :D ) I was just wondering if there’s any suggestions for agreed value insurance companies? Thanks for any answers And hopefully I’ve posted this in the right section, apologies if ...

Just recently purchased a 1989 E30 2.5 converted to 2.7
Bit of a project but ultimately pretty clean.

Need advice on modifications such as a new exhaust system, ECU and differential options.
Thanks. VidMate Mobdro

Just replaced all my front seals on my ‘86 325es and timing belt. I have both the crank and the camshaft aligned at TDC but what about the oil shaft? When I took off that pulley it did spin and on the reinstall I made sure the dowel pin was inserted but I’m not sure if the oil pulley is connected to...

Last weekend flushed my power steering and it is performing so much better! Today I pulled it out and noticed it leaked in the garage and then again in the driveway (just a bit). When I did the flush I pulled the hex plug out of the pump. I haven’t had a chance to get under and look but I suspect it...