E30 Zone

payment sent. pm incoming

thanks for that. can you remove part numbers
33306778328 Stopper, rear. x1
33316794866 Stopper, rear. x1
and is everything in stock?

and...
33526764406 Torx screw with collar. x4

pm sent

Thanks for the quote. Any chance I could get a break down, I'm in the middle of taking it apart and need to figure out what bolts need to be changed and if any can be reused.

and....
33326764505 Torx screw x4

and..... 33306793891 Securing bolt. x6 33326762875 Hex screw with collar. x2 33306760349 Self-locking collar nut. x4 07146888626 Eccentric bolt. x2 33306786187 Eccentric flat washer. x2 07119906489 Hexagon screw with flange. x8 33326760668 Self-locking collar nut. x10 33326764292 Eccentric bolt. x2 ...

Hi can I get a price and availability of some bolts and nuts for my e92 please 33326760340 Torx-bolt with washer. x4 33176760343 Hex bolt with washer. x2 33326768354 Hex screw with collar. x4 07147203503 Hexagon screw with flange x2 33326760380 Combination nut x1 33176760342 Nut. x1 33306778328 Stop...

It's been ages since I did mine but have a vague memory of this. I've just had a quick google and....quote from https://www.bimmerforums.co.uk/threads/advice-on-m40-camshaft-replacement.115363/ When refitting the cam pulley, leave the centre bolt finger tight until the belt is on. Fit the cam lockin...

WOW. What an incredible build and story.
I can't wait to see it finished, it looks like it will be brilliant.
Thank for sharing it with us.

The last pic on this link to the Wiki shows how they fit.
https://www.e30zone.net/e30wiki/index.p ... pop_Bushes
HTH

Could it be one of your lines is bulging? You posted this awhile back. Well the parts I needed arrived, got them fitted tonight & bled the brakes on my own using a vizibleed one man bleeder, While inwas bleeding the brakes I noticed that the front drivers side braided line had a kink/twist in it rig...

Hi could you tell me if part number 51718135880 is available?
For E36 Touring.
Thanks Blake.

Yep should do, although if they have been cut its normally because there was a fault that someone couldn't be bothered to chase. (could be as simple as bad earth) There are quite a few switches on Ebay but probably worth sending a PM to Magpie or 1 of the breakers on here. Also worth asking Cotswold...

V8turd wrote: ↑
Tue Mar 08, 2022 6:10 pm

These are what I have found. Typically though in typical previous owners fashion, he has obviously cut the bloody plug off so either I need a switch AND plug from a breaker or use spade connectors to get this wired in

What do you have left? Just the switch?

The first 4 go into quite a large plug on the back of the fog light switch

(That's the grey purple at the front and plain grey at the back)

I think the others are the bulbs for the head light adjuster.

HTH

Thanks for the replies, glad it's not just me / my settings.

flybynite wrote: ↑
Mon Feb 21, 2022 5:03 pm
Yep same for me, I just have 2 links saved, one direct to a forum post and one to the home page. If one doesn't work the other one does.

Good idea I shall try that.

Is anyone else still geting this? It gets quite annoying, The only way I can use the site after logging on is to clear my history then go back to a thread then log back in, then back to bad gateway and repeat.
I'm aware its been going on for ages but is there a fix coming? Or is it just me?

H&R list springs for a Touring but Eibach don't anymore. H&R part number is 29729-1 for a four cylinder Touring
See this thread for Eibach part numbers.

viewtopic.php?f=2&t=278933&p=2960805#p2960805

HTH

That would be the fuel filter under the car as said the fuel pump is in the fuel tank under the rear seat.

Have you removed the locking tab? It's easy to miss if you don't know it's there. Use a screw driver to pry it out, you will need a new one as it will deform. Link to show the part but available cheaper elsewhere: https://www.ebay.co.uk/itm/173743217055?mkevt=1&mkcid=1&mkrid=710-53481-19255-0&campid...

Didn't notice this was your first post so welcome to the zone, loads of good info in the Wiki and the E30 technical Help page is great if you get stuck
viewforum.php?f=2

The youtube vids are of cars with AC, for non AC cars the resistor is on the inside.
Link to the Wiki....
https://www.e30zone.net/e30wiki/index.p ... nly_on_Max

HTH

Use a pair of grips where I have put the blue line and gently wiggle from side to side, if it won't budge spray some oil from the cabin side wait 10 mins and try again. If it really won't move the red line is where it joins the tube to the cabin so you could try using a hacksaw blade to try and brea...

Just for clarity if your MOT runs out on or after 30th of March 2020 you will have 6 months added to your current MOT but it could take some time to update the system. So paultv will have a current MOT until 15th of October 2020. Any MOT that expires between (currently) 30th March 2020 and 29th Marc...

I have a Sealey SuperMIG 150. You can use it with both flux cored and normal wire up to 5kg reels and can use the small (very expensive) gas bottles with the regulator supplied or you can use the proper sized bottles with a proper regulator. Personally the flux cored wire is only useful if your weld...

https://www.e30zone.net/e30wiki/index.php/Retrofit

This one?

https://www.e30zone.net/e30wiki/images/ ... leaner.pdf

https://www.e30zone.net/e30wiki/images/ ... ashers.pdf

It sounds like you still have the locking plate over the nut. It can be hard to see as it is hammered over and rusts to the nut. Use a screw driver in the slots at the side of the hub and hammer it until it moves/deforms then pull out with pliers. HTH :) and a link to the wiki if you haven't seen it...

Earth/Ground points to check are on the Passenger side wing (behind your ABS unit) Behind the glove box Rear passenger side wheel arch just above the rear strut top mount. Link to the wiki wiring diagrams, slightly different to Tourings but good enough. https://www.e30zone.net/e30wiki/index.php?titl...

Well the new flasher relay came, albeit with too many pins (4 instead of 3), but sadly swapping them gives me the same issue with just a new type of click. At least I get to choose which sound I prefer... Old: https://www.youtube.com/watch?v=SknzTsEFxkE New: https://www.youtube.com/watch?v=Q3NZbHH4...

You don't seem to be able to get them specifically for a Touring anymore but convertible springs are commonly used. Part numbers coming up Convertible and Touring: 4 Cylinder - E2010-240 6 Cylinder - E2010-140 And just in case anyone else needs them Saloons: 4 Cylinder - E2003-240 6 Cylinder - E2003...

Eibach did list springs for Tourings but when I last tried to order I was told they didn't know when they would be back in stock. (4 or 5 years ago) However even before this many people have used the springs for convertibles. Links from my watch list coming up https://www.ebay.co.uk/itm/Eibach-Pro-K...

It is generally not a good idea to mess with the AFM unless you have gone through the entire engine to check for any air leaks even the smallest split in a pipe can affect idle. (Also manifold and throttle body gaskets) Also fuel injectors not working correctly, blue temp sensor not reading correctl...

Also what Mart said.

It could be the track rods (ball joints worn) or it could be the wheel bearing. Does the wheel have play up, down and side to side?
It could also be the ball joints on the wishbones or the lollipop bushings but I think you did these recently?
Do you have much play in the steering wheel?
HTH

Search found 51 matches

Re: price and availability please

Re: price and availability please

Re: price and availability please

Re: price and availability please

Re: price and availability please

Re: price and availability please

Re: price and availability please

price and availability please

Re: M40 Cam Pulley on Cam problem?

Re: E30 from Ukraine - "Shadow of Intelligence"

Re: M3 Eccentic lollipop bushes

Re: brake problems

Availability?

Re: Fogloght switch wiring one for Brianmooore lol

Re: Fogloght switch wiring one for Brianmooore lol

Re: Fogloght switch wiring one for Brianmooore lol

Re: 502 bad gateway

502 bad gateway

Re: Lowering a Touring

Re: Fuel pump location, '87 325i Cabbie manual RHD

Re: Rusty rear hub/wheel bearing nut?

Re: heater resistor on a 1986 baur

Re: heater resistor on a 1986 baur

Re: Parking Brake Cable Removal

Re: MOT`s suspended

Re: MIG recomendations?

Re: Headlamp washer pipework routing

Re: Rusty rear hub/wheel bearing nut?

Re: First E30 - Needs some TLC! - 316i Touring Rescue

Re: First E30 - Needs some TLC! - 316i Touring Rescue

Re: Springs

Re: First E30 - Needs some TLC!

Re: AFM Tweaking/Calibrating - Ideas?

Re: Wouldn't do the tracking?

Re: Wouldn't do the tracking?