E30 Zone

as above great service and quality product

top man went out of his way to get different size spacers for me

cant wait till santa comes

cheers

I get the feeling from paypal addresses that one or two people have asked their other halves to buy them brakes for xmas....!!!

beats socks n yorkie hope u do gift wrap n a bow

j

can u put me down for a kit please
pm sent

J

Gazza
I'll be travelling down m6 sunday mate if u want to meet up. i think knutsford services would be good for most of the nw chaps

Jason

Did you make that from scratch or mod the original?
nice work btw

Sorry i assumed they would be similar rates

off topic
fuzzy did you cut your x member to clear your sump or make a new sump

check fuses windows and sunroof work of interior light circuit when doors are open and ignition is off
when the doors are closed they switch from the fuse can't remember which one

Surely there must be 20mm diffrence between the 40mm and 60mm springs

if your car was fitted with mtec suspension then a -35mm spring will not lower your car any I think they quote the lowering height over standard ride height not the mtec suspension which is 35mm lower

just measured m tec spring @ 210 mm

I belive there -35mm but its not unheard of for me to be wrong

fuzzy wrote:a -60 rear springs is 190mm high.i dont have a -40 to hand.

At a guess it would be 170 mm

Could be the prop centre bearing on its way out

possibly wishbone bushes.

does the steering wheel shake or does it feel like your whole cars vibrating

oooops
http://cgi.ebay.co.uk/ws/eBayISAPI.dll? ... &rd=1&rd=1

try again

This lot would be a good start
no conection with seller
was going to buy this but wifeyshe say no no no

http://cgi.ebay.co.uk/ws/eBayISAPI.dll? ... ename=STRK

found a step by step guide with pics
this guy used to post on here and passion ford
hth

http://www.e30cosworth.co.uk/

http://cgi.ebay.co.uk/ws/eBayISAPI.dll? ... &rd=1&rd=1

ant would this do the job
may be in touch for manifold once i find a turbo

Cheers tim for that m8 didn't realise the pressure plate was so heavy saved me some work. schuey the bbtb is a modded standard one ,the remap is done on via obd skt and loaded onto a new chip Tim your prob right about the figures the car feels alot stronger now it pulls better from low revs there is...

Hi m8 you can get them ultrasonic cleaned at a bosch dealer/engine centre . not sure about swapping them from another model you'd need to check

or just turn stereo up

http://www.barryboys.co.uk/phpBB2/viewf ... 296a0f8327

Some real council chariotsage

If stock losses are 24% what would account for my 40% loss?
patrick while your engine is out you might look @ swapping flywheel I think one of the m20 single mass ones fit not sure but think its 320 one. I'm sure someone will tell u for certain .

Not sure Tim, noticed slight wobble on d/s rear wheel cos the weights had come unstuck
don't know if it was that. Is rwhp measured or calculated?

Benjy, wish they were m8 .97.7 rwhp a lot of tranny losses? just tb at the moment itg to follow then some cams when the card recovers a little.

Huge i got the bbtb and remap thru the zone shop m8 speak to Sal he'll sort you out.
I did a full service and changed any hoses etc before remap

Hi mate had a remap today @ chipped uk 163bhp/148.2lb/ft this was up from 118hp .

was surprised it was so low to start with. Thought about ms for mine to get rid of afm
but it looked to tech for me , a Bbtb improved the throttle response and cured the flat spot I had

good luck

Jason

Hi had my is mapped today,was suprised how much difference it's made up to 163bhp from 118.
bbtb is v good cured the flatspot at 3k ish and throttle response is so much better

http://www.sailingsource.com/cherub/chf ... menu=build

Try this link m8, Its boat site but it shows u how

Vac bagging seems to be used for the bigger parts

good luck

J

Search found 24 matches

Re: Keri-WMS

Re:

Re: Big Brake Kit recommendations

Re: How tall are E30 Rear Lowering Springs?

Re: How tall are E30 Rear Lowering Springs?

Re: electric window switches only working with doors open???

Re: How tall are E30 Rear Lowering Springs?

Re: How tall are E30 Rear Lowering Springs?

Re: How tall are E30 Rear Lowering Springs?

Re: vibartion at 60mph????

Re: YB Cosworth Swap

Re: YB Cosworth Swap

Re: YB Cosworth Swap

Re: 318 IS Turbo kit or supercharger Kit

Re:

Re: 318is ticking sound

Re:

Re: Newbie asking about m42 tuning

Re: Newbie asking about m42 tuning

Re: Newbie asking about m42 tuning

Re: mega squirt on the IS

Re: Newbie asking about m42 tuning

cf build