E30 Zone

http://www.ebay.com/itm/BMW-E36-323-325 ... Make%3ABMW

These look good but they must be crap, they are so cheap

Can anyone suggest performance exhaust manifolds for M52 engine? Cheers in advance

DanThe wrote:BMW ECP GSF etc, pretty much anywhere that sells thermostats

Tried GSF and ECP all they have is 88-92 operating temperatures so I'm assuming that it has to be a certain type to fit an M52?

DanThe wrote:As standard they come with a 93/94 thermostat, I use an 80 degree in E30's

Dan where could I purchase an 80 degree thermostat?

http://www.mishimoto.co.uk/bmw-e36-aluminum-performance-radiator-92-99.html http://www.e30zone.net/modules.php?name=Forums&file=viewtopic&t=243247&postdays=0&postorder=asc&start=325 Brilliant rads Thanks Jimbob, did the little hoses come with the header tank. May be a stupid question but are m52 su...

Can anyone suggest a decent alloy radiator for an M52 E30, I'm sick of the shitty plastic radiators. cheers

jmc330i wrote:Either secondhand from a trader on here or try Cotswold BMW for a quote on a new part (new parts aren't always expensive and in some cases, less than secondhand!)

Cotswold BMW - http://www.e30zone.net/modules.php?name ... forum&f=39

Cheers mate

jmc330i wrote:No.9?

http://bmwfans.info/parts-catalog/E36-C ... #1738629_9

Yes part number 9 on the diagram. Where do I go next?

As above does anyone know the part number for this or where would be best to get one, broke the clip when taking off the inlet? Cheers in advance

Is this the correct arrangement for the heater pipes, see picture below: cheers

craigieeb wrote:Either the hose that goes to the stub on the back of the head has split,
Or
The little gasket on the stub pipe has gone....

Only way to get to it is move the engine forward, do you have any pictures by any chance?

I have a water leak in my e30, it seems to be coming from above the gearbox, actually leaking right down between bell housing and the engine. What could it be, there is no water on the carpets on the inside though. Is there any hoses up behind the engine and the firewall that I can't see?

These are good - http://www.ebay.co.uk/itm/BMW-E30-E21-E28-E36-Compact-Z3-Rear-Camber-Toe-Adjuster-Kit-Plates/251895955961?_trksid=p2047675.c100011.m1850&_trkparms=aid%3D222007%26algo%3DSIC.MBE%26ao%3D1%26asc%3D29952%26meid%3D9e63dad866e844c88c9e0c759a66f1bd%26pid%3D100011%26rk%3D1%26rkt%3D1%26sd%3...

Is it a big job to fit camber plates on the rear beam, and what are the best ones to get? Any advice greatly appreciated

What needs to be custom about it? Or is it just fixed position brackets you want? Dan its just fixed position ones I need, the ones that have been fitted put the seat way off to the left, you can see in my other thread. http://www.e30zone.net/modules.php?name=Forums&file=viewtopic&t=258928&highlight=

cypriot_boy_2k7 wrote:To cater what seats?

Cobra Suzuka bucket seat

I've been told there is someone on here who sells custom seat brackets, does anyone know who I need to try and contact?

Is there a relay in the circuit? Where is the negative (earth) lead from the fan connected? Is there a fuse in the circuit? Where does the fan circuit obtain its power from? There is a relay in the circuit, the negative earth is connected to the front panel. There is also a fuse which in the circui...

Brianmoooore wrote:Even with the edit it still doesn't make much sense!
First point is that the fan isn't supposed to come on "when it gets up to temperature". It's supposed to come on when the engine begins to overheat, otherwise it'll be wasting power and fuel.
Did it ever work?

Yes it worked!

Right sorry, when it gets too hot the fan fails to kick in, thanks for all the help!

I have had a bucket seat fitted to my e30, the brackets that were used you can see in the pictures attached. My seat is way to the left making the pedals seem like i have to reach to the right to hit the brake and accelerator. I looked at the tunnel side of the brackets and have about 10mm max scope...

I have a 14 inch kenlow fan on my M52 conversion, but the fan isn't coming on when it gets to temperature. When I turn the resistor you can hear it click but nothing happens. Its probably a simple problem but I dont have a clue about electrics. Does anyone have any suggestions what it could be or su...

Jesus325iTouring wrote:How does the tyre valve work behind the centre cap???

Good question! hmmm I wonder!

alpina123 wrote:20 spokes would indicate they are genuine are they on a e39?

Yes they are on an e39!

alpina123 wrote:20 spokes would indicate they are genuine are they on a e39?

Yes they are on an e39!

Blitz wrote:There not real. Tyre valve should be behind the center cap.

Cheers, any idea if they are worth much?

How do you know if these are genuine Alpina? they're19 inch

Motorhole wrote:M52 E30 drifting on-board. This is Redcar on here.

Some good skills there, I hope I'll be able to do that!

yes it will go just fine. there are a few 318iS's in the local drift series where i am at the moment. A 318is in the dry, that must be hard work and some good driving there's a lad goes to teeside drift track with a white 318is ... drifts it all day then drives it home . I assume a hydraulic handbr...

age wrote:yes it will go just fine.
there are a few 318iS's in the local drift series where i am at the moment.

A 318is in the dry, that must be hard work and some good driving

I know drifting an E30 may not be to everyones taste but just wondering is the power output of an M52 adequate for a drift machine from anyones experience on here?

What's people's opinion of this circuit? It seems very short at 1 mile

HI guys, I am not sure if this had gone forward as I was unable to make it. Having just come back from Stratford I must say that the nice tall new builds and the environment itself has improved for the better. A pleasant drive to Westfields with the wife to break my bank and only just got back to R...

Hi Mate, Schmidt modernlines are what you're after - not sure if they are exactly the same as the above, as they might be original revolutions or image wheels. Have a look on edition 38 as some of the vw boys run them or they are available new: http://www.rimstyle.com/alloywheels/wheel/index.html?w...

Would love to get some on my E30

Search found 109 matches

Re: Performance exhaust Manifolds

Performance exhaust Manifolds

Re: Alloy radiator M52

Re: Alloy radiator M52

Re: Alloy radiator M52

Alloy radiator M52

M50 inlet vacumn part

Heater Pipes

Re: Water leak M52 above gearbox

Water leak M52 above gearbox

Re: Adjustable camber plates

Adjustable camber plates

Re: Custom seat mounts

Re: Custom seat mounts

Custom seat mounts

Re: Auto Electrician East london/Essex

Re: Auto Electrician East london/Essex

Re: Auto Electrician East london/Essex

Bucket seat Mounts

Auto Electrician East london/Essex

Re: Alpina rims, how do I know if genuine?

Re: Alpina rims, how do I know if genuine?

Re: Alpina rims, how do I know if genuine?

Re: Alpina rims, how do I know if genuine?

Alpina rims, how do I know if genuine?

Re: M52 power enough for drift machine

Re: M52 power enough for drift machine

Re: M52 power enough for drift machine

M52 power enough for drift machine

Lydden Hill circuit

Re: meet

Re: Love these rims

Love these rims