E30 Zone

....good tap and boom .....

Eureka!!! Thanks Dan ! I should've hit it like I do with most things when they don't work and that's always the last resort is to hit it with a hammer should've thought of that but every day is a school day you could definitely hear the tapping of the working injectors and then I listen to the nonwo...

Thx will try that tap

I've had a reply from james at injecturetune too

Referring back to the two lower pulse sensors it's the upper one that was faulty and would not let the car start what does this do? ,as this was not allowing it to start,

Thanks Mike

Hi Brian , l have managed to get the engine going although it is misfiring, I changed all three sensors from the other car and found that one of the pulse sensors was faulty. Got the engine going although it has a misfire, I changed all three sensors from the other car and found that one of the puls...

What readings should I be expecting?

I started to change over the injector rail ,I removed the two bolts and the feed and return pipes at the rear of the injector rail , I have also removed the four clips that hold the injectors on but I'm not too sure how the injector rail pulls off ,is it just a bit of brute force to remove it ? Thx ...

Hi Brian I have found three sensors on the gearbox I removed the top one and changed it over from another car and tested it and no difference so I am assuming this is the speed sensor which is the top one Assume the bottom two ,are the ones you are talking about so I will remove these and change the...

Morning Brian I pulled off the hose by the pressure regulator and cracked her over and a decent amount of fuel flowed so I'm happy at the moment but the fuel pumps are working. I changed over the airflow meter just to check to see if it was a bad connection but the airflow meter seems to work okay o...

l have a spark ,plugs are not wet ,fuel is being pumped on cranking,
Is there a way of testing pressure regulator ,does it come off the injection rail ?

The pumps are providing fuel immediately into a container when first cranking so would it be the pressure regulator or an electric feed / signal issue to fuel injection ?
Thx M

Will the fuel flow out of rail hose with just ignition on at key position two ?

Thanks for your advice guys .
Is ther a noticeable noise from the wheel arch pump when working, l have given it th the usual tap or two but still no joy so will have to try in tank pump next. When taking off hose on injector rail does the fuel flow on cranking of engine all the time ?

Non Starting S 14 engine, car has been stored but has been started frequently and has never been a problem before I remove the airflow meter to clean the engine bay below, I've put it all back together and now she won't start whether this is coincidental I don't know. I have checked the two relays b...

Problem starting S 14 engine car has been stored but has been started frequently and has never been a problem before. I removed the airflow meter to clean the engine bay below , I put it all back together and now she won't start whether this is coincidental I don't know. I have checked the two relay...

Just got a set of Yokos on and they are great 110 fitted at my local tyre depot had toyo R1R on last time they were good but wore quickly and only came 6mm as new .

Thx Brian
Excellent advice as always !!

Only one jet works It has intensive wash too Water is coming out of what looks like a non return valve via a small hole in side of valve Jet nozzle is not blocked as I've taken it off ,no water is coming out of tube on the open end of valve so I'm assuming valve is blocked and the hole is a "blow of...

Redish automotive Bristol

got an itch for a 1M,any views any things to look out for on these babies ?

whiterhino wrote:Does anyone know the background of the 2 for sale currently.
They have been about for a while now. Mr classic heroes holds himself and the cars in high regard.

He certainly does ,"be careful out there "

POR 15 is way the best

any one got views of toyo r1r v contis ?
where are you getting contis for less than 100?

ive got toyo R1R,s on my m3 they are fantastic in the dry and 100 each ,very soft though which in turn gives grip by the bucket loads but wears quick ,at 100 a corner thats ok though
any one else used these?

Sold at the nec last nov 24500!
Car is not nice needs new roof ,has rust holes in roof cassette ,it's rough!
Prob been patched up and put back to auction

pm sent

top man

hi atul
sorry to hear but family first always

hi atul
sorry to hear but family first always

needs some nice stickers now ,do you know any body that could do them??

nice work Atul

you should buy bosch from Costco ,lifetime warranty!!!!!!!!!!!!!!

shud of just gone with a fistful of dollars -bartered job done

You know it makes sense!

U will never regret owning an M 3

Why would it need an engine rebuild at 100,000 miles unless it's been raped? No offence, you are doing a very good job at restoring it, but your iS is a proper crusty turd and will never really be worth much. If you ever were serious about buying the m3, you should get it bought, chuck the iS back ...

Search found 53 matches

Re: Non starting s14

Re: Non starting s14

Re: Non starting s14

Re: Non starting s14

Re: Non starting s14

Re: Non starting s14

Re: Non starting s14

Re: Non starting s14

Re: Non starting s14

Re: Non starting s14

Re: Non starting s14

Re: Non starting s14

Non starting s14

S14 non start

Re: Help me find some 225 45 16 tyres

Re: Washer jets

Washer jets

Re: E30 Garage around Dorset, Hampshire or Somerset

1M

Re: Alpina c2.7 advice

Re:

Re:

Re:

Re: Silverstone auction

Re: pukar designs NLA

Re: pukar designs NLA

Re: pukar designs NLA

Re: pukar designs NLA

Re:

Re:

Re: Car Battery

Re: 1990 M3 Purchase Advice

Re: 1990 M3 Purchase Advice

Re: 1990 M3 Purchase Advice

Re: 1990 M3 Purchase Advice