E30 Zone

Paid via paypal cheers

Can i get a price on e36 coupe door sill trim. LH in grey pt no 51478187169 cheers

Any clio mk2 with the plastic wings. Cant remember if abs has anything to do with it. But im sure its in the wiki guide thats what i used.

And it looks about 1.5 times longer than the standard. What prop shaft is used. Does it mount to existing body mounts or does that need fabricating aswell.

If the battery is in the boot there is fuseable link off the positve lead tuckedbehind the carpet and wraped in black insulation. If this has blown it will not allow power to the dme. Easy to check with a volt meter or a physical check to see if the the fuse has blown. Not sure if this fuse exists o...

Could be, i remember finding out when i removed my loom. Either way mine wasnt auto or aircon so not needed.

I thinks its something to do with auto boxes. If yours was manual it will be left loose.

Sounds like servo has gone, so no assistance on the brake brake pedal.
Try pressing the brakes with the engine off the while keeping the pedal down turn on the engine. The pedal should compress some more. Also do you get a air sucking noise when the pedal is repeatedly pressed.

Payment sent via pay pal

Hello,

Could I get a price for 3 s50b32 itb dog bones
Put no 13541404346. X3

Thank you.

I work in the aircraft industry. They have a rubber layer on the jaws originally designed to remove stiff electrical plugs (screw in style) without damaging the external casing of the plug. Not exactly a pipe wrench but same style you could put tape on for similar effect

As well as the heat and freeze method, although its push fit held with an o-ring, trying to twist and pull at the same time.
I used a pipe wrench with soft jaws to hold it. But engine was removed so much easier to get the leverage on it

Same with the white spirit (much cheaper than brake cleaner) Easier to remove bonnet an lie it down glue side up. Leave the white spirit about 5 mins to really soften the glue then use a kitchen towel or cloth and it will wipe off easily.

Easiest option is find a z3 diff from a bigger engined z3. 188 diff. You can't mix and match medium and small case but can e36 Medium and e30 medium. And same for small if you wanted. Changing final drive ratio isn't really a diy, it requires shims and dial gauges to get get the correct mesh. And th...

Did this solve the tapping

Payed via PayPal.

Can I get a price on e34 m50 accelerator Bowden cable. Pt no 35411160611
And e36 m3 accelerator pedal. pt no 35411158660
Thank you.

Yeah that's the one. Worth a try to see if it gets any better.

Could be the hydraulic tappets. There is a bleed procedure which is easily googled. Something like run it at 2k revs for 10 mins. Can't remember exactly.

Hi can I get a price for m20 rocker cover gasket pt no 11121730271
And 4 rubber bungs or no 11331264519
Thank you

It is meant to be rigid, as in not rotate in the rubber but rotate the rubber slightly with a twisting action. The solid bushes are more stiff but the weight of a car and turning forces they do flex just fine just without the slop of the non solid bushes. For normal driving you probably won't notice...

Carbon canister is not needed.

I think the other canister you mention is the air/oil separator known as ccv. It's not needed but some sort of catch can will be needed I just left it on. They can fail according to the internet but mine works fine and I'll look at changing it if it ever fails.

I'm pretty sure it's m12 x1.5 that's for m20 not sure about other engines.

All depends on gearbox. I'm guessing your using the ZF5 speed so that ratio of 3.25 will be good.

Even if they are still good they will be 20+ years old and have potential to leak after you refit the head. Up to you but I changed mine while the head was off as a not to expensive precaution. I had a workshop remove and fit mine while the valves were lapped. But I believe it can be done with a soc...

If the syncromesh was wearing out it would engage the gear and cause a crunch. Something is not releasing properly clutch wise. Either pressure plate broke, friction plate binding on the gearbox input shaft, master or slave cylinders breaking down internally. Or an air leak in the hydraulic system. ...

Hi can I get a price on the following part nos please
11611735265
and
11611738759

Thanks Gav

IMG-20180813-WA0000 by Gavin Teal - Flickr2BBcode LITE

Maybe the wrong size belt. If it's maxed out on adjustment. And a slight squeak on lock is normal as the pump is fully loaded with no where for the fluid to go.

Sounds like master or slave cylinders going or air in the system. Check the foot well and bell housing for fluid. Even if there isn't fluid present they can leak internally not giving the correct fluid displacement to fully disengage the clutch. They arnt to expensive to change both but the master i...

Price please
11431433495. 7 series dipstick guide tube with extra pipe attached for ccv drain
11431740045. O-ring for said pipe.
Cheers

Mine never came with the collars just the lock nuts. I bought them from the dealer for about £5

Just don't forget the locking collars for the e36 outers. It's an MOT fail. Ask me how I know lol item 10 in this picture

Screenshot_20180713-080111_Chrome by Gavin Teal - Flickr2BBcode LITE

Yes shell's the same so will accept any e30 engine and an e36 conversion has been well documented. It's fairly straight forward with a few bits need making or if money isn't an issue it can all be bought ready made.

Search found 123 matches

Re: Price please

Price please

Re: Clio servo.

Re: M20 RX8 6 speed adaptor plates

Re: Crank sensor not working? No spark or fuel help

Re: Doing Mr52 - Need help/advice

Re: Doing Mr52 - Need help/advice

Re: Brake pedal gone rock hard.

Re: Price please s50 Itb dog bone

Price please s50 Itb dog bone

Re: How to remove this cap and replace seal?

Re: How to remove this cap and replace seal?

Re: How do you get this f'in mutha f'in bstrd sht off????

Re: Diff rebuild / ratio swap

Re: M52 tapping noise

Re: Price please

Price please

Re: M52 tapping noise

Re: M52 tapping noise

Price please

Re: Wishbone "Eccentric rear Bush"

Re: Black Canisters

Re: Black Canisters

Re: Sensor thread

Re: LSD for e30 s50b30

Re: Valve seal removal

Re: First Gear Only Engages Below 3-5mph

Price please

Re: COTM August - Anything goes

Re: Squeeky power steering belt!

Re: Gearbox or Clutch issues?

Price please

Re: Purple tag and track rods

Re: Purple tag and track rods

Re: engine changes and body size