E30 Zone

What is everyone using to correct bump steer on there standard e30's?

Been looking and theres of the shelf stuff for m3's but nothing for standard front end.

Thanks

How much for a e30
325 manual gearbox (260)

Anybody no of a e12 being broken for parts i need a few bits for a manual conversion.

Thanks for any help.

Thanks dan don't suppose you no if the cds was capped at the bottom with a hole big enough for the frame bolt to go through or if the bolt stays were it is and this plate just welded over the hole in the floor do you?

Thanks for the replys..

Was longer bolts used then ie the bolt went through the cage then the floor to the frame? Or was the cage just welded to the floor around the hole that the bolt goes through?
Thanks

Has anybody got and info on cages that go to the rear subframe mount points (wear the long stud drops though the floor for the subframe bush)? Im building a new cage soon and i am going to incorporate the subframe pick up points into it but i want to find out if the long stud goes though the cage (u...

Thanks for the replys it is a car for track days but i do drive it on the road..

I understand what works for one might not another im just looking for a base to start the play with realy.

Not sure about the springs i was gona ask gaz in a few months what there are and if there correct for my car when i get them rebuilt. but other than that its a m52 2.8, weight is 1050kg and tyres are federal 595 rsr's

Sorry should have said my set up haha.. Gaz golds all round Front camber top mounts H&R adjustable roll bars front and rear No way of adjusting caster just got the offset bushes And standard rear beam so no adjustment there eather. Thanks for the replys im just looking for a base that i can then wor...

What setup are people using on track? Camber,caster toe in/out etc.

Got access to a top spec bit of tracking equipment and want to try a few setups.

Doing lydden hill in a few weeks trying to beat my last years time.

As title what DB is your system putting out on track? Brands hatch has lowerd its drive by to 92db now and i think most other tracks are lower than that anyway (correct me if im wrong). Lydden hill is now 100db aswell (not that im into drifting but i like to o bhp show) My m52 track car is about 103...

Thanks guys

Hi im looking to buy some lsd clutches ive found the on American websites but nothing in the uk.
Bmw say they dont sell then any more.

Any one no wear i can buy them and some other diff parts bearings, seals ect?

Thanks

M52b28 soon to be stroked to 3.0 with m54 parts

Hi im looking for a lsd for my track car and i have found a suitable ratio ect but its a small case.
I would then be getting rebuilt and a few other bits.

What i want to no is though is the small case up to the job?
Or should it be med case?

Its only a track car some very little road use.

Thanks

hi has anyone done this?
using the m54b30 crank rods and pistons and inlet cam..

the cams aparently longer so needs a little machining is this true?

and is there any other things that might need doing or is it a strait fit other than that?

thanks....

just start from 2:45lol i was waiting for the silver e46 to pass then i wanted to catch it and pass but slipped abit haha

just lyddon for bhp but will be doing brands after that......

hi im looking to get my car set up soon for a track day I got coming up

I have got gaz gold coilovers front and rear, adjustable top mounts and eccentric bushes on the arms.

wear should I start with geometry camber toe in/out ect

any help would greatly be appreciated......

thanks....

to be honest i spent 20 mins trying to find how to calculator but found nothing lol

cheers mate

i dont feel comftable standing on the pedal and feel i could brake abit later with a servo...

what calculation do i need to do to work out a better MS setup then because i could try that first bfour getting a servo

any body have any experience with them? currently ive got porsche boxter rear calipers on the front and 325 rear disc set up on the back... oh with bias peda box but feb time i will be changing to noble m400 calipers on the front with 301mm disc from pug 405hdi remote servo (front only) then on the ...

lol cheers

do e38 brembo 4 pots fit strait onto a e30 bracket wise dont worry about the discs

how easy will it be to change a lsd unit from one case to another IE change just the lsd unit into another case using the crown wheel and pinoin from the new diff.

all sorted cheers people i made a new pipe with an fittings and braided hose..

i havent got pas pump on my e30 dont feel the need for it and as irs a track car less weight haha...

thanks again

has any one put a s50 oil filter housing on a m52 engine and had issues with the vanos oil pipe..

the banjo bolt dosent screw into the filter housing as its too big..

any idears?

cheers

ps i have fitted the housing to put a oil cooler on the engine

all done i used a company called 'end tuning' in birmingham.
£40 inc return p&p moved rev limit to 7k, ews fucked off as well..

3 day turn around highly recommended.

all done i used a company called 'end tuning' in birmingham.
£40 inc return p&p moved rev limit to 7k, ews fucked off as well..

3 day turn around highly recommended.

any one no wear i can get the 5500rpm rev limit removed in kent?
cheers

hi nealy finished my 52 conversion i just went to put the prop on tonight and its to short ive got a m52 2.8 geatrag 260 with modified mount m20 flywheel, clutch, starter ect e30 diff e28 m5 engine mounts (round ones not the others) and i bought a e30 325 prop but its too short its the front section...

im doing a m52 conversion but im using a m20 box but it did not come with the bearing fork arm.

what exactly do i need the arm and what els is there any springs or anything?

cheers

ill get some pics tomorow when im at work cheers make

e30 316 with m52b28 dos anyone have a part number for a clutch when using a m20 flywheel with a e30 325 box? i was under the impression it was a getrag 260 as i had to make the mount up but now i have checked the side of the box the number on the casing is 240.0.0.0130.91 which has lead me to believ...

Search found 73 matches

Bump steer correction.

Re: Consolidated E30 Dismantling Thread - 316i to 325i Sport

E12

Re: Cage to rear subframe mount points.

Re: Cage to rear subframe mount points.

Cage to rear subframe mount points.

Re: Track suspension setup what settings do you use?

Re: Track suspension setup what settings do you use?

Re: Track suspension setup what settings do you use?

Track suspension setup what settings do you use?

DB exhaust noise whats yours and what systems are you using.

Re:

Lsd clutches where to buy?

Re: Track use med or small case diff.

Track use med or small case diff.

m52 stroking to 3.0 questions...

Re: camber toe ect set up

Re: camber toe ect set up

camber toe ect set up

Re: remote brake servos

Re: remote brake servos

Re: remote brake servos

remote brake servos

Re: e38 brembos

e38 brembos

swapping lsd unit

Re: s50 oil filter housing on m52 vanos oil pipe fitment

s50 oil filter housing on m52 vanos oil pipe fitment

Re: rev limit removal

Re: rev limit removal

rev limit removal

propshaft length

clutch fork

Re: clutch

clutch