E30 Zone

Hey I haven't bought my setup yet no. Although Google has the answers.

Check this out has lots of useful info http://www.rtsauto.com/e30-bmw-m62-v8-swap-3/

Very quick and efficient transaction, goods arrived well packed. Would certainly recommend and use again.

Thank you motor Motormanmick,

I wI'll speak with ECP about this error. Much appreciated as I thought it wasn't right.

Many thanks

Hello TPS,

So the sizes differ between these then? The arms are from an ABS car a rolling shell I bought. I will have to check on the bearings.

Hi Rav,
I got it from ECP a bit back. I was trying to find the original bearing to confirm fitment. I am confused.

I had my trailing arms shot blasted and powdercoated. However the new rear bearings don't need pressing in they just slip in with a gap remaining. 2 questions I have. 1) does the trailing arm bearing housing have a sleeve, which I am missing? 2) Are there different size bearings? - I have 75mm outer...

Proper like the look of this I've got a reiger infinity one, yet to fit it. Rebuilding the rest of the car first haha

I am going same route M60 base engine but same gearbox. Clutch wise the i believe the standard m5 clutch will fit the m62 flywheel. It has a solid hub so you get chatter down the input shaft as there is no damper between engine and gearbox. The standard m5 clutch is also a self adjusting clutch. I h...

Hack Engineering are the sole revshift UK distributors check them out.

I have a revshift poly dount to install when my car is back on the road! Great quality products.

www.hackengineering.co.uk

Have you tried ebay for a supply and fit? there are a few on there. I can't vouch for the quality or rep though as never used them.

Nice convertible i must say! I just got my hands on one for the summer body is not as nice as yours though. what other plans you got after you've sorted the hood?

Well I hope you continue down this path as I have always wanted a V8 E30.

Its currently my "long term" project .... however just bought a vert which is my summer project / daily (when it's on the road) needs a little work.

Need to add pics, it's a bit rough round edges but I love it.

Glad you came out of it unharmed. Metal can always be replaced.

I am still in for this

Oh dear a perfect example of how a company's reputation can be ruined by word of mouth, this was only a few months ago too. I was dubious at first until gooseygander110 rated them on the for sale thread. I dunno what to do now. My car is a long term project, so I plan on building it once and buildin...

You can put my name down for 1 x CNC machined aluminum shortshifter please

Looks top quality

Any info / pics on the laser cut stands ?

Awesome

liking the cheeky 320i badge ;) haha

Hopefully I'll progress more with mine.

Looks sweet! Congrats buddy !

Before I started with the M60 I went along this route, acquired parts for an M50 turbo stroker build - M54B30 crank, a Holset HX35w turbo also a custom ally inlet mani to.

What's your power goal?

Good luck with the build can't wait to see updates watching this one!

monster build! still road legal too EPIC!

I had this as my desktop background in 2013 form!

Looks spot on IMO, well done Sir ..... with boost to come later in year ? OMG

gooseygander110 wrote:carried on modifying and welding up my exhaust ...........side exit each side !! can't wait to hear it

You got pics of this setup?

Bet it will sound awesome!

Nice one Craig, was just checking out other threads didn't see this one yet.

Cheers

Tank was solid. There is rust on the mounting brackets, and the biggest holes are the access plates which have been removed

I need to get a custom bracket made for my e30 brake setup i am using the e38 brembos with 312mm redrilled tt discs. Can anyone offer assistance here? I am how to go about this, I've seen threaded inserts used on the bracket and also a simple plate. to connect the mounting locations. Thanks in advan...

Dropped tank today. wanted to check for rust prior to shell welding. wasn't too bad. http://i37.photobucket.com/albums/e73/B19GOK/Aprilprogress2_zpsf17ddba1.jpg http://i37.photobucket.com/albums/e73/B19GOK/Aprilprogress9_zps1f100194.jpg http://i37.photobucket.com/albums/e73/B19GOK/Aprilprogress7_zps...

I got a set of these for my project I have trolley jack with a max lift of 520mm so i haven't maxed out the axle stands

Been doing some rust / corrosion hunting http://i37.photobucket.com/albums/e73/B19GOK/Marchprogress27_zps5fd5463e.jpg http://i37.photobucket.com/albums/e73/B19GOK/Marchprogress28_zpsf896d455.jpg http://i37.photobucket.com/albums/e73/B19GOK/Marchprogress28_zpsf896d455.jpg http://i37.photobucket.com/a...

update: received these through the post which are necessary to give clearance for those beefy 4 pots http://i37.photobucket.com/albums/e73/B19GOK/spacers1_zpsaf8fa419.png They are perfect giving enough room for calipers (seen much much closer) http://i37.photobucket.com/albums/e73/B19GOK/spacers5_zp...

Looks good to me Dave,
where abouts are you based? also what suspension you runnnig? as I've recently bought some GAZ coilovers for my project but it's basically a shell atm

Dat ass! Each to their own it's your car your mods, I respect the effort involved. Removing the rear bumper to clean behind it!

Keep the pics coming what're the plans? What interior you got?

We'll done Jamie top work! Those struts are completely transformed! Nice one keep up the effort

Work is looking Top man wish i had room to work, I've ordered some backing plates too along with new bolts nuts and washers. Quick Q: what did you use to remove paint from the bearing housing face? Just wondered on the importance of the face if it needs to be polished smooth for the bearing fitting ...

I could only dream that the E30 Shell I got from you will one day look half as good as this. Great effort looks spot on.

Thanks for the response, I'll be in touch.

Latest developments.... http://i37.photobucket.com/albums/e73/B19GOK/coatedarm_zpsc83f8d56.jpg Nicely powder coated trailing arms, pushed in the poly bushes too :D http://i37.photobucket.com/albums/e73/B19GOK/busharm_zps0bbef6dd.jpg Previously been in touch with the chaps at BBB which is the option ...

I was just about to update my progress with similar photos as I got the trailing arms back from the powdercoaters.

Looking good Jamie.

I need to make up my own threaded car bearing inserter or just take em to local shop to do if i can't be bothered.

looking forward to more progress.

Search found 66 matches

Re: Flywheel?

Re: magpie

Re: Rear wheel bearing issues

Re: Rear wheel bearing issues

Re: Rear wheel bearing issues

Rear wheel bearing issues

Re: My new golf vr6 lip, chin spoiler, splitter whatever its

Re: Flywheel?

Re: Poly Donut

Re: Back in the fold, and need a new roof, help

Re: How easy and fast is a 340i?

Re:

Re: NP parts group buy

Re: NP parts group buy

Re: NP parts group buy

Re: m62 wiring

Re: m62 wiring

Re: My turbo build :)

Re:

Re:

Re: Big brake kits..

Re:

Re: Big brake kits..

Re:

Re: Lifting from the bumper mounts?

Re: Another M60b40 E30 project

Re: Another M60b40 E30 project

Re: My 318IS

Re: Adam's E30 316i Touring!

Re:

Re:

Re: Calypso action- wheels on

Re: parts needed for E30 M60 conversion

Re: Another M60b40 E30 project

Re: