E30 Zone

thanks for all your advice, i think i will stick with injection for now

am thinking of getting 40DCOEs for a conversion, am after some help with this if anyone has done it before. i know you can buy the carbs and manifold from webcon but i dont have 1800 quid . was thinking of getting 3 x carbs 2nd hand. how do you get rid of the electrics for the injectors and afm. any...

i will try all of the above, also i have 2 new batteries
thanks

the battery in my 325i keeps dying about every few days, i have checked everything i can thick of. i dont want to keep charging the battery either. as far as i know the alternator is charging as the when the battery is fully charged it shows 12volts and my incar gauge and when car is running it show...

try bmminiparts, thats where i got mine, original bmw and only about 65 quid each

got a pair of black leather sports seats and fitted them tonight, they look the part. Just to get the headcloth sorted now.

why do they make these then if they are supposedly no good.

i tried 3 bar but seems to run rich, but will try it for a while. thanks

not what i wanted to hear Zaust, i will give the adjustable a go if i can get the right settings first

i have a bmw e30 325i and fitted a fse power boost valve, induction kit and mild ecu chip, do you know what bar i need to set the regulator at with a gauge at idle. At the moment i have it 2.5 bar at idle

What is this procedure ?

i got a lsd fitted last week but the seal in the diff is leaking
its where the propshaft is attached is this a big job to change, can it be done with the diff on the car ?

got a lsd fitted, also fitted a speedtouch chip and a fse powerboost valve although dont notice much extra power but drives smoother.

i appreciate all your comments, got a valuation done today for insurance , 5000. am happy with that.

1990 4 dr 325i total respray in valencia orange . was very bad condition when i got her in black with rust everywhere so new sills, rear inner and outer arches, new wings. Mtec 2 original door pods with fibreglass bumpers strengthened at sides .All new suspension, ie arms, bushes, lollypops with pow...

yes i will do, its only on four tonight, number 2 cylinder is the culprit with the plugs

temperature was only a quarter way up, the rest of the plugs are fine, with the car not running for a while would condensation have built up and mixed with the oil, how exactly would i know

i just finished restoring my 325i after 2 years in the making including a full body resto and paint, all new suspension brakes etc it has its mot on wednesday so i thought i would take it up the road for a blast to make sure everything was okay. it seemed to be off a cylinder so when i came back hom...

no, exactly what do you mean, which wires. its a double switch

new bulbs fitted

the rear fogs are not working, i have checked fuses, relays , new switch but still no go, anyone any ideas

bmminiparts are great for bm only parts and cheaper

try bmminiparts for the inner arches and i got pattern wings, sills etc from carz2 and the quality was very good, my bodyshop guy was pleased with the quality and fit.

this was happening to me and found out that the boot light was staying on

thanks for the underdash panel, great service and good condition

try bmminiparts, thats were i get all my "bmw only" parts. very good site and if not in uk they only take about 7 days from germany

5" in diameter. ( I THINK)

thats what i thought when replacing the lines, but i used a hard plastic pipe which you heat up and bend when replacing the vent pipe.

got the batteries that brian recommended fron cpc, soldered them in yesterday. fitted the cluster today, started the car an let run for a while. re-set the inspection lights with a cheap ebay item and hey presto, full green lights and a working rev counter and water temp gauge.
thanks brian

ok thanks brian, its just that the originals are AA but i will give the others a go.

The 3rd line is the vent pipe from the tank, and they are all 8mm.

had a look on the site, why couldnt i use a AA with a capacity of 1300 or are these to strong
whats the original capacity

what about the below battery
varta BT04108 on the cpc site

there is no site at that address !

i cannot find them anywhere, i suppose it would be better if i knew what i am lookin for.

the old batteries are varta ni-cd krh 15/51 so what do i look for , eg volts, capacity etc

where can i buy replacement batteries for the si board?

Search found 116 matches

Re: 325i to carbs help

325i to carbs help

Re: 325i battery draining

325i battery draining

Re: rear inner arches

Re:

Re: Adjustable fuel pressure regulator/gauge setup

Re: Adjustable fuel pressure regulator/gauge setup

Re: Adjustable fuel pressure regulator/gauge setup

Adjustable fuel pressure regulator/gauge setup

Re: Differential seal

Differential seal

Re:

Re:

andy523's 325i

Re: creamy oil on cap, under rocker cover

Re: creamy oil on cap, under rocker cover

creamy oil on cap, under rocker cover

Re: rear fog lights not working

Re: rear fog lights not working

rear fog lights not working

Re: Bracket connecting drop link to wishbone - where to buy

Re: Body Panels...

Re: drained battery problem

Re: TPS

Re: Gearbox Exhaust hanger

Re: Front Speakers

Re:

Re: si board batteries

Re: si board batteries

Re: Fuel line confusion

Re: si board batteries

Re: si board batteries

Re: si board batteries

si board batteries