E30 Zone

So what's everyone using ???
Do you change the complete leg or just the hub on the front
And what are you putting on the back ??
Thanks.

It was a ews fault. Not sending the correct signal to the ecu. Now all up and running. Thanks for everyone's input
Just got to get the rear quarter painted and it put back together now.
Cheers. Mark.

When I put a multi meter on it I have different readings like 10.88v, 11.15v, etc. How can I find out if it's working or not. I feel it has a immobiliser fault as it turns over but I have no spark or fuel pump running.
Thanks.

Thanks for that.

I've got power out of the green on the ews and the moter turns over but I don't have a spark or power to the fuel pump.

Any ideas anyone ??

Cheers Mark.

Hi all. Can you please tell me . . . . If I have voltage coming out the ews controller ( silver box with yellow socket ) on the thick green wire is my ews working correctly ?
Thanks.

No click from it.

It's all wired as the pic on wiki but I have one extra wire from the engine loom. I think I have a fault with the ews as I have power into it( the little black box where the key halo plugs into ) from the fuse and out of it from the third wire into the ews controller.( silver box. Cigarette packet s...

It turns over on the key but no fuel pump running or spark.
EWS is in the car above the pedals under the original ecu mounting bracket.
This is where the broken wire is. The attached end is on a thin green wire which comes live when the ign is turned on.

Loads to do to it yet to get it back nice but it will get there.
It's been off the road for at last 3 years but has been in the dry.

Yes. 2.5. 24v with ews.

Perple ,yellow strip is live to the ews.
Wire which is spliced into the thin green wire, in engine loom, is live with ing' on.

I've bought back a car that I owned a while ago that I fitted a 2.5 16v into which has been stood for some time. It's a ews, silver labelled ecu and won't fire. It has a wire attached to a thin green wire in the cable tray ( engine bay ) that isn't attached to anything. The end that's loose is close...

hongkongfuey wrote:i think there is one in my local scrappy, ill look monday

thanks mate

When i done my E30 conversion it all came from one car . Thanks for that . When did EWS start being used.

Any one brakeing a 1995 E36 320 ? Loom EWS ECU and key wanted . HA Ha

I take it then that if we had the key that was with the car that the ECU came from it would be ok.???????

the car is a 1997 with a 2.0ltr single vanos m52 1995 engine fitted. The last seven numbers off the current ECU : 1 703 808

The ECU being used is a Siemens 5WK9 002 MS40.1

I like you wheels beemer lad. what r they?

Never been to York. I run at santa pod and Avon park and went to brunttingthorpe once. It was a 200mph club day. It went 2.02 0-60mph and i come off it at 156mph as it was floating about a bit.

ok thanks . wish i hadn't got involved to.

Ha ha.. Its got a small block chevy in it with about 440 bhp on the motor and then i run 150 bhp of gas when i race.. Check out Outlaw anglia . My number is OA70. Im no where near a quick one but then mine is on the road. It has run 10.20@136mph best in street trim. It is good fun. http://pic20.pict...

Just had a ride out with a couple of mates the other weekend and had another bash at running my 318is after a diff change . Was well pleased with the results as it ran 14.55@96.07mph. A bit off my normal pace ,but then i was lacking a load of cubic inches .

It was from a E36 . I do know that . I do have some idear. I have put a M50 into my 318is and have built and run a 1953 Ford pop with asmall block chevy in it so not totaly blind to it all.

Just helpen a mate fit a 2.0L into what was a E36 316 . The 2.0l is a E36 engine which came from one place the loom from another and the ECU from another . Question is does the ecu need reprograming to the engine as the starter motor works but we dont have a spark or fuel pump running. By the way th...

Mmmmmmm. Thanks. Maybe a re-think then.

I'm hoping to fit it to my 318is which has now got a E36 325 in it because with the original diff 1st gear is pointless.
Thanks.

Does anyone know if a E36 compact 1.9 diff will fit a E30.
Thanks. Mark.

If i change from small case to medium case will i need to change my halfshafts for shorter ones or dosen't the actual size of the diff housing change flange to flange.

I have one fitted in mine and it's fantastic.

Thanks

Me too. I'll have a ride over.

.......on a m50 . 2.5 engine block. thanks . Mark.

that's what it said on the boot lid.

Search found 61 matches

5 stud hubs

Re: Testing EWS

Re: Testing EWS

Re: Testing EWS

Re: Testing EWS

Testing EWS

Re: E30 returns home. M50. Wiring.

Re: E30 returns home. M50. Wiring.

Re: E30 returns home. M50. Wiring.

Re: E30 returns home. M50. Wiring.

Re: E30 returns home. M50. Wiring.

Re: E30 returns home. M50. Wiring.

Re: E30 returns home. M50. Wiring.

Re: E30 returns home. M50. Wiring.

E30 returns home. M50. Wiring.

Re: Non starter... ecu ...

Re: Non starter... ecu ...

Re: Non starter... ecu ...

Re: Non starter... ecu ...

Re: Non starter... ecu ...

Re: santa pod . 15/10/2011

Re: Non starter... ecu ...

Re: santa pod . 15/10/2011

santa pod . 15/10/2011

Re: Non starter... ecu ...

Non starter... ecu ...

Re: compact diff into a E30

Re: compact diff into a E30

compact diff into a E30

diff casings

Re: chipping m50 ecu ??? >>pics<<

Re: where do i find the engine numbers......

Re: East Anglian Summer meet in Hunstanton, anyone intereste

where do i find the engine numbers......

Re: santa pod