E30 Zone

yeh sorry should have been more specific lol, I do intend on running wasted spark ignition, on an MS dealer site they also do coil packs, thought i just as well get it all from one place, they do individual or six tower (not bank) wasnt sure which would be best, but ive just checked again and one si...

another thing, is it better to run 6 individual coil packs, one six bank coil pack or does it not really make any difference?

Thanks for all the help

if I do it I think I might go with the MS3-Pro, seems a good price considering all the features and also I have a friend who has worked with it before

if running a MAP sensor does that eliminate the MAF?

cool, gunni's gstuning correct? i was going to email them later. manifold is fitted with a 38mm tial wastegate and comes with a 50mm BOV. For a fuel pump i was going to go with walbro 255 in front the original in tank pump. if using wasted spark that eliminates the dizzy on the front correct? appare...

does anyone know if these will fit

http://www.ebay.co.uk/itm/Denso-650cc-t ... 25939aa58d

That's great thank you for help, lots more bed time reading ahead lol

Brakes are uprated to 335mm disc 4 pot calipers, she's on bilstein coilovers with adjustable top mounts and poly bushed all round and basically fully rebuilt I've replaced pretty much everything for new which is how it's come to cost so much but I wanted it perfect. I understand it's not an easy tas...

Hi all, I'm thinking of fitting an m20 turbo in my car, I've got an engine lined up, fully forged 2.5 with 2.7 stroker kit and modified head, it comes with turbo and manifold not eBay one (not sure what turbo it is but the it's all speced to run 700+) and has uprated clutch, basically the main engin...

fitted new braided brake hoses, replaced all brake pipes and she got some nice new LSD oil. She'll be as good as new one day

I've recently done an m52 swap into a w reg 316 :) ews3 to ews2 swap it runs perfectly, but I can't get the rev counter or temp gauge to work, most people say a pair of 6 cyl clocks will sort the rev counter but I've tried 2 sets with no luck but my biggest concern is the temp gauge, I don't wont to...

Where in Cornwall are you? I could possibly lend a hand or two

if needed

Bit of a stab in the dark but make sure you have your sandwich plate in (bit between the back of the block and the flywheel), more so though check your locating dowels make sure there not stuck in the block from the m52 gearbox and that the m40 box doesnt have them in still, basically you should onl...

Was getting about 300ish to a tank but that was when the pump was leaking. The last one I had would do about 35mpg with mostly round town driving.

hi ive got a 1997 325tds had it for about 12 months now but never bothered working out the mpg, i always thought it was bad but just never worked it out. i recently noticed the diesel pump was leaking not sure how long its been leaking for though, have since fixed the leak and have made a point of w...

Cool any particular make that's better than others

As titled I was wondering what is the best oil to use in an m52 or at least what are others using cheers

thats some very sexy manifolds dan how much would a pair of them set me back

Hi kev the antenna is on the floor at the mo all from the same car both sets I have are, I'm not sure if my original set is fooked or not now as the new set is no different :? Violet and White wire is linked to position 1 on the ignition. Red and yellow are permanent live from ignition. Tested earth...

Still very stuck bought ews from craigieeb plugged her and still nothing any help would be great on the brink of scrapping it at the moment

Still very stuck bought ews from craigieeb plugged her and still nothing any help would be great on the brink of scrapping it at the moment

Ok so my ews 2 is shagged

I know were there is an ecu and ews the ecu has the same numbers but it's using ews 3 can I use this in place of ews 2 with out any wiring changes

I've wired pins 1 and 3 into into the black an yellow start wire but unfortunately still no click from ews box or power to the fuel pump. Am i missing something or am right so far thanks

Spare connection sorted bit of a special moment plug was hiding under some cables :mad: . On the wiring sticky it says to wire the ews from pin 18 at ecu through pin 7 at the engine loom plug but that applies to the e36 not e30, pin 7 on the e30 plug is Ignition switch and that's were I put it not p...

Oh dear I've just noticed a slight mistake I connected the ews wire to pin 7 but on the wrong plug so it was wired into the ignition live is the ecu likely to be ok or have I just fried it. It is turning over regardless of were the key is, surly this isn't right.

Ah that makes a bit more sense ok so I've done that but still nothing she's tuning over but I've got no fuel or spark also there is a conection on the front of the injector loom that I don't seem to have mate to is this right

I have done most of the wiring on my m52 but am a bit stuck when it comes to the ews I've read the sticky but it says that the violet and White wire should be live in acc, run and start how is this possible because if you join the three together it tries to start when the key is in position 2 please...

Fair enough s50 power would be nice guess I'll stick to the m50 manifold then

Does anyone know what sort of work is requiered to fit these just so I can get I bit of an idea of what's involved before I go making any rash decisions. The thought of the sound of 6 TBs sucking away does sound appealing

So their not quiet so simple to fit as m50 mani then?

I've put an m52b28 in my e30 and have yet got round to fitting the m50 manifold but was wondering whether it would be better with m3 TBs I know they cost a bit more but the big question is will they help produce more power over all compared to an m50 manifold? Has any one tried this yet or no?

Can an auto loom be modified and used in an e30 if so do you just need to cut the auto bits out?

hi all my mate has got a cheap m3 6 speed box and i was contemplating fitting this whilst fitting my m52, the biggest question is what flywheel would i have to use i was going to use the 260 getrag so only have the m20 flywheel.

agree it is bizzare, had my licence just over 2 years, and just insured my IS for £230 odd with pete best fully comp with uk and euro break down cover,0 excess 0 screen excess , also because i own and drive another car- i bought a discovery in dember after getting £800+ quotes- but lancaster insure...

Got offered £50 for a mint Mtec 2 325i sport was almost tempted ha

Search found 37 matches

Re: M20 turbo parts help

Re: M20 turbo parts help

Re: M20 turbo parts help

Re: M20 turbo parts help

Re: M20 turbo parts help

Re: M20 turbo parts help

Re: M20 turbo parts help

Re: M20 turbo parts help

M20 turbo parts help

Re:

328i compact temp and rev gauge not working

Re: quote from wiki

Re: quote from wiki

Re: 325tds bad fuel consumption

325tds bad fuel consumption

Re: Best oil for m52

Best oil for m52

Re:

Re: Ews wiring help

Re: Ews wiring help

Re: Ews wiring help

Re: Ews wiring help

Re: Ews wiring help

Re: Ews wiring help

Re: Ews wiring help

Re: Ews wiring help

Ews wiring help

Re: M3 throttle bodies over m50 manifold

Re: M3 throttle bodies over m50 manifold

Re: M3 throttle bodies over m50 manifold

M3 throttle bodies over m50 manifold

M52 auto loom

6 speed box

Re: Webuyanycar.com