E30 Zone

Wow she's a beaut!!!

the oil temp and water temp?? Yep...

I'm going to try swapping ecu's to see if I fried anything in the process...

GAHH! So I just threw a e36 non vanos loom in my non vanos swapped e30. I wanted a cleaner install than the rats nest I had before... I converted the C101 properly according to the pin outs found on the RM European m50 swap guide. I've checked 20 times! Along with a few other sources. Im showing an ...

Hi there, I need a price on the following components.

E30 M3 LEFT FRONT SPRING STRUT 31312225307

E30 M3 FRONT RIGHT SPRING STRUT 31312225308

Thanks.

Emerson B.

Has anyone got the pinout diagrans for the Bosch Motronic Non Vanos ECU? 402 is the ECU ID number I do believe.

Update?

Thanks.

I've looked up all of the REAL OEM Part numbers to make your life easy so I'll just make a list for you to quote. Here goes... Vehicle details: REG: M862 TUK and it's a bmw 328i with M52 2.8L SINGLE VANOS engine -Connector rod bolts PN: 11247589671 I need all 12 -Rear Crankshaft seal PN: 11142249533...

I've Been waiting on a flywheel and starter since the mid summer, I paypal's him my hard earned money and still have yet to receive the products. I've contacted him repetitively asking when my parts are to arrive with little to no reaponce. When I asked for my money back I was told it would happen w...

Please PM prices for carbon Boot and Bonnet.

Thanks!!

You can get more rubber down with 16's...

A cool one I snapped not so long ago...

Hi can I get a quote on the following parts for bmw E30 325I diff reg number D36 URX: Input shaft Parts: Dust cover plate PN: 33121200284 Securing plate PN: 23211490120 Shaft seal PN: 33101214099 TAPERED ROLLER BEARING PN: 33121203615 TAPERED ROLLER BEARING PN: 33121203616 CLAMPING BUSH PN: 33121744...

Does anyone know a good place to pick up medium case differential seals and shims?

Has anyone got any good pictures of their wiring looms?

I'm curious how everyone has made up their looms. It looks like a pretty simple operation going into an e30.

Definitely over-fuelling. I'm not running one at the moment due to some construction on my wiring harness... Long story. Anyway... I run a wideband sensor and gauge read-out, when I had my sensor in; the car would idle at 14.6 AFR (14.6 parts air to one part fuel) and it cruise at around 13.9. Now (...

I'm on my... 6th one now (i think). Im 20, started when I was 15.

it's extra weight and it does drag on the engine a bit.

I'm just curious is someone can save me the hassle of the string lol.

Does anyone know how long of a belt I need if I remove the PAS pump?

buy an engine management system first, that will be your biggest challenge. Then tune the engine to pick up some ponies. Then the turbo process will take much less time. Trying to do a loom/ and a turbo kit all at once get's a little overwhelming at times.

Need a price on shims and seals for an e30 m3 diff.

Cheers.

I'm getting 200 miles on a full tank (60 quidish)...

Something must be wrong. NV m50, 328 box, and what feels like a 3.64 diff.

How many miles can you do on one tank with your m50?

Pleasure doing business. He knew exactly what I needed and had it to me right away.

Thanks!

Emerson B.

Pleasure doing business. He knew exactly what I needed and had it to me right away.

Thanks!

Emerson B.

Who has done it? I need to do away with the pump. Does anyone know what size belt to replace it with?

Good day everyone, I work for Nitron Racing in Whitney (Oxfordshire). We build high end suspension equipment for road/ race cars, bikes etc. We are looking for an E30 M3 so we can measure it up and design a full coilover kit as we do all other models of M3 except the E30. Is there anyone out there o...

Hope you have 10grand...

And then some.

a proper 5 stud (BASICALLY all e36 m3 front suspension and z3 rear TA's) allows for bigger brakes and a variety of performance brake upgrades, cheaper and better coil over setup's, and better suspension GEO. All of this however depends if you want to spend the money, and if you require said suspensi...

Just had a quick question...

Was wondering if anyone knew what the front strut GEO was compared to the 51mm standard e30 strut in regards to length/ spindle angle/ spindle size/ etc...

1500 pound budget. in engine/ drivetrain/ and other relative things. not to mention adequate suspension/ brakes etc.

cheers!

okay, quick question... don't have time to search. Will the auto ECU from an M5x work in a manual setup. I know you have to just cut out all auto trans wires but I was just curious as to weather or not I need to get a new ECU.

Anyone know where to find a good Vems Ecu for an m50? Anyone have one for sale?

Does anyone know of a good thread depicting how to properly mount the tech 1 boot spoiler?

I'm fine with doing it I just don't want to drill into my car without a little bit of guidance on where to do it

Search found 196 matches

Re: 1990 Arctic Sport

Re: Trouble shoot

Re: Trouble shoot

Trouble shoot

Price Please

Wiring

Re: Parts quote please...

Parts quote please...

Re:

Re: Composite Panels

Re: 15's or 16's???

welcome to england...

Diff parts

Diff rebuild

Wiring Loom Pics

Re: Lambda

Re: What is the average age of E30 owners?

Re: PAS Delete

PAS Delete

Re: Custom intake on M50 engine?

Diff parts

Re: Fuel mileage?

Fuel mileage?

Re:

Re:

M50 power steering delete

Nitron Racing

Re: i want the new m3 engine in my e30

Re: 4 stud vs 5 stud

m3 suspension

Re: Lazy mans Engine swap...

Re: auto ecu

auto ecu

Vems ECU

spoiler help