E30 Zone

I still haven't fitted the original 1 I bought as part of the BTB group buy last year. Never used, not even test fitted. Still in original packaging.

Picture and price HERE

James

The E38 4-pots are different to the E31 4-pots (well at least the mounting holes are anyway)

James

Bugger Bugger Bugger, forgot to get some tickets. Im flying to Edinburgh on Saturday to collect a car. Driving back to Bristol via Grimsby / Cadwell Park to pop in and say hello

Have a good test Jimmy, see you Sunday

James.

I've had my 320i for about 3 years now but started turning it into a race car about 6 months ago. E30 320i for the Production BMW Cup. http://img.photobucket.com/albums/v293/james_redish/PICT9561.jpg http://img.photobucket.com/albums/v293/james_redish/PICT0949.jpg http://img.photobucket.com/albums/v...

Hi Jhonno, If it helps, I have just bought a Gaz kit. Dave @ Gaz recommended i used 600 front, and 300 rears. http://img.photobucket.com/albums/v293/james_redish/PICT1850.jpg Car is a 320i (running in PBMW Cup) with Custom Cage multipoint weld in - going to all 4 strut turrets. I haven't yet diving ...

iii) The steering wheel is free within MSA regulations.

The regs are here if anyone is interested....

And thanks for the 'heads up' Jimmy

Appreaciated mate

5.12. WHEELS / STEERING: As per MSA regulations [C(b)]14 and the following; i) The steering system including rack, tie rods and steering arms shall remain as standard. I was wanting one myself :cry: bugger bugger bugger :cry: That's a real issue with my steering at the moment. Had a complete overha...

JimmyC wrote:hope its not for your race car James- Tut tut

Are we not allowed them ?
Bugger!

1) Zaust?? 2) Oldroydsr4 (if price is reasonable, not more than Ã‚£50) 3) Agreen 4) ROC 5) ed325i 6) doughboy 7) jaffro 8 ) Ant 9) Ant 10) shorty73 11) blitz877 12) rossle 13) fowler 14) mattG 15) Yanninya. 16) Maxfield 17) Dunx 18 ) Trise30rally 19) Beemer Redeemer (James) 20) Beemer Redeemer (Jame...

http://img.photobucket.com/albums/v293/james_redish/PICT1850.jpg http://img.photobucket.com/albums/v293/james_redish/PICT1853.jpg http://img.photobucket.com/albums/v293/james_redish/PICT1855.jpg http://img.photobucket.com/albums/v293/james_redish/PICT1862.jpg http://img.photobucket.com/albums/v293/...

I believe its the 1.9 Z3 (basically any 4 pot Z3 should do) I just bought one yesturday for the E30. But yet to fit it. If your not too worried about spending a little bit more, then i would advise getting the white plastic socket bush that the gearstick 'ball' sits into. They're a pain in the ass t...

Just ordered a Evo + mounts + harness.
Top deal, cheers Jimmy !

James

agreen has reserved a set of 51mm struts with me. I have 1 set left if anyone's interested? Normally Ã‚£73.97 delivered (inc vat) in the shop, But Ã‚£60 delivered to any Zone member. Just trying to help out if you can't get hold of any 51mm struts. All striped down and ready to go. I can send straig...

Sent mine off today as well.

Great price, thanks for your efforts Elf.

James

MJG wrote:Dave called me today, missed the call though so will be giving him a buzz back.

Same here, I'll try call him Monday i reckon.

Thanks Elf - well done for your efforts

James

If anybody needs 51mm struts.
I have 2 spare sets.
Let me know if your interested

Cheers

James

I'm registering my interest on these. I have just disassembled my front struts ready for sending to Gaz anyway so a group buy seems like the sensible thing to do. Might be wrong here (so please correct me if so), but i think you need to send the 51mm struts to be used rather than the 45mm struts. I ...

1 chap pulled out on the sale so these are STILL FOR SALE

Ad here..... http://www.e30zone.net/modules.php?name ... ic&t=90508

Cheers

James

Bump,

Is this still happening ?
I need an M20 one asap.

Cheers

James

If you take on this conversion, i have a set of of the S50 manifolds developed by BTB exhausts (including X-pipe) needed for installing the S50 engine into the E30 chassis. These are exactly what you need to have a hassle free installation regarding exhaust manifold clearence and steering shaft issu...

so 300 for the engine??? whats wrong with it? Is it M60 or M62? do you have the key/ecu? Nothing wrong with the engine at all mate. 121k and all good. Engine isn't priced seperately at 300. I was doing you a deal price as a whole package. Its M60B40. Has ECU and complete matching EWS kit with key. ...

Are you after just the box ?
As i would only be interested in selling the box, flywheel, clutch, manual wiring loom & ECU (inc EWS kit) and gear stick assy as a package.
I don't want lots of individual bits lying around. So everything minus the 4.0 i would be looking for Ã‚£800

Cheers
James

So the M60B30 box I have at the mo would be the s5s. If only I could find a s6s in the scrappy somewhere!! Cheers again Jan I have 2x S6S gearbox's in stock along with clutch, flywheel, gearstick assy, manual engine M60 loom (inc engine ECU with matching EWS kit) 1 kit is ready and available for im...

Bringing the thread back from the dead lol :D EDIT; Just remember i used to be on here as E30_Tracker until we signed up as the company (i.e Beemer Redeemer) just incase anyone wonders "who the hell is this and i can't remember him on our list" Just wondering if anyone is still looking for a set BTB...

Hi Tom, wondered if it was you lol.

Yeah ditch the emmissions pump, but if your keeping aircon then you'll need the bracket. If your getting rid of aircon then chuck the whole thing and have an empty drivers side of the block.

See you soon i'm sure.
James

That air con compressor bracket doubles up as the exhaust emmisions air pump bracket i believe.

If so, then its on ETK/EPC/RealOEM in section 11 (Engine) page 1323
BMW part number 11.72.1.402.236

Where are you in Bristol, i may have a bracket on an S50 that i was using.

Cheers

James

I have a 3.91 standard diff on my 325 and wanted a lsd in the same ratio but no one has one what is the next size im not too bothered on topend but do want excelleration????? We have one in stock. Still in the car and can be tested by the customer if needed. #280 + vat (P&P #19.95 if needed) James ...

Yeah defo BBS kit, i sold one earlier in the year.

James

Stunning in every sense

You'll be an expert on the second one!! Rachet straps a great idea Gary ;) Start at the front and work your way back, ie the bars from the front struts, points to be aware off, make sure you get the bar behind the dash right back or the instrument cluster wont fit. Make sure you stick the acelerato...

Remove the whole thing, sunroof cartridge, mech and carrier (almost size and shape of the roof panel itself). Then you've got a few options; * You could remove the roof skin completely and buy a non-sunroof skin from BMW (about Ã‚£220). Thats the option ive gone for. BUT it is a serious PITA, time c...

Gary thats huge help. Thanks so much for all the info mate :D Greatly appreciated. I will be installing the cages myself. (fingers crossed as long as nothing goes drastically out of plan.) The ratchet strap info is very useful. cheers. I'll have to see where all the joints come to at the top of the ...

Massive thanks for all the advice and opinions guys (aswell as the great photo's). Ive now ordered the cages today. Went for 2 Custom Cage Multipoint, weld in CDS jobbies :D (with the profiled ends - even though they sound as useful as a 3rd tit :roll: ) Should be here in 7-10 working days. Cheers a...

Jimmy,

Cheers for the PM - your a star ;)

Only reason im posting here is because i cant PM.
Just get this message....

Sorry, but the administrator has prevented you from sending private messages.

Cheers

James

Search found 89 matches

Re: 4 pot calipers..

Re: PBMWC/TTRS @ Cadwell Park 10th/11th May FREES TICKETS

Re:

Re:

Re:

Re: what z3 short shifter do i need?

Re: COBRA Motorsport Seats- CHEAP DEAL for the zone

Re: gaz

Re:

Re:

Re: M60 V8 compatible gear boxes

Re: lsd

Re: