E30 Zone

And your a dick who knows fuck all but what your told !

Google USC 2015 golf diesel

I know for a fact not what some one thinks or is told ! One of my friends has just spent 20k on a vauxhall motor thats just a tall motor money is not an issue if his ebay cooler was crap he would change it its that simple ! I watched a Golf tdi on the weekend run a 9.6sec 1/4 mile at 141mph with an ...

Had an LUK in my Audi S4 holding 500ft lb torque and that's a standard Audi part most paddle clutches arn't rated to that ! I used to sell LUK every day never had a problem with one Was it an LUK clutch designed for a 170hp M20 engine in your Audi? :) No but it wasn't designed for 500ftlb neither !

An after market system with x2 1.77" exhausts is the same as having one 2.5" exhaust

Had an LUK in my Audi S4 holding 500ft lb torque and that's a standard Audi part most paddle clutches arn't rated to that !
I used to sell LUK every day never had a problem with one

Nothing wrong with LUK oe on most cars

The finish shouldn't be mirror. The gasket needs a keyed finish. The finish should me like a mirror if your using an MLS gasket ! Even if your not the finish should look like a record with oil colours if you get my grasp ? Some machine shops are still using grinding stones for cast iron heads on al...

Where they new cams ?
Did you run them in ?

And because facts are nothing without figures, enjoy: http://www.evolutionm.net/forums/evo-engine-turbo-drivetrain/260479-ebay-intercooler-testing-pros-buschur-racing-facts-truth.html Nothing like some sweet knock inducing high IAT's from a shitty eBay IC to blow a turbo engine :D But f00k it, migh...

You said they are no good for boost like you said you would not buy mega squirt I simply proved you wrong ! Never at any point did I say the aluminium block was better and maximum psi bmw is only just over a thousand hp isn't it ? I don't dispute any of the facts you added later on only what you sai...

m54b30 801whp/881wnm World record!!! On Germanboost with the aluminium block and 517whp on stock motor you need to get in touch and tell him what he's done wrong ! He might be in the market for a 15k cosworth ecu and a garret intercooler for a grand ! By the way a 900hp garret cooler is just over £5...

Kieron, I don't know what "sending someone on a bum steers" means, but I am not exactly giving out misleading information which is what I assume you mean? RE VEMs, yes, there is better standalone out there for the money, however, for £720 plug and play with a base map installed, you will struggle t...

I know nothing about turbo's but what I do know is just by changing a head gasket on a M52 you can pull the threads out of the block so wouldn't have thought it would like 500/600 bhp either. Modern trends is leaning towards using a iron M50 block for a lot of bigger bhp engine builds. Just my pene...

If the ECU can control VANOS, it makes sense to use it. However if you are after simplicity, NV will be fine. Not sure if MS can handle VANOS control. Not massively clued up on Megasquirt, but would imagine it has an output for a boost controller like VEMS? I would go for that myself. Personally I ...

johnmaccow wrote:How much boost is safe on an m52?
I was wondering as if it was low enough would 300bhp be possible?
Obviously still a fair amount for an e30 and saves going sr20det

The only down side of the m52 is the head studs , I am going for 600hp on my m52 so don't worry about it

Not sure i had a really cheap clutchnet paddle in my VR6 turbo with no issues doing more power and talk than this other one

Thanks for the input just the same

I'm running a SPEC stage 3+ on my M50 turbo and it's never let me down, go to their site and it'll tell you which clutch will be best suited to you ftlb of torque.. Not keen on spec i had to do some work on a Golf VR6 turbo recently and on removal of the spec clutch all the springs were hanging out...

Hi just after peoples thoughts on what clutch to buy ?

I am building an m52 with a gt4094r with an m20 flywheel and need a clutch to hold at least 600hp thanks

M50 for turbo. M52's ali blocks don't like boost. As far as internals go, you won't need to change anything up to 500hp. Just install a thicker gasket. The older method was to use a MLS, but this has proved unreliable (see Craig's thread in the turbo section). The current popular method is to use a...

Also this is a superflow dyno that is calibrated every month and is bang on the money ,this can not be compared with a dynojet which in this cars case would be showing about 270+hp

Instead of thinking what standalone you like why not speak to your tuner and see what he recommends seeing he will be doing the work .

Don't buy VEMS or MEGASQUIRT for your money you can buy adaptronic off EFI PARTS RUNCORN its the best standalone you can buy for your money !
Do some research on efi parts best stand alone tuner about !
VEMS is based on megasquirt

Search found 23 matches

Re:

Re:

Re: advised clutch for m52 conversion

Re: Single exhaust system.

Re: advised clutch for m52 conversion

Re: advised clutch for m52 conversion

Re: Head surface finish once skimmed ?

Re: Tappety sound post-cam swap - M52/Dibilias

Re:

Re: M50 or M52 turbo setup info

Re: M50 or M52 turbo setup info

Re: M50 or M52 turbo setup info

Re: M50 or M52 turbo setup info

Re: M50 or M52 turbo setup info

Re: M50 or M52 turbo setup info

Re: M52 TURBO CLUTCH ??????????????????

Re: M52 TURBO CLUTCH ??????????????????

Re: M52 TURBO CLUTCH ??????????????????

M52 TURBO CLUTCH ??????????????????

Re: M50 or M52 turbo setup info

Re: Anyone done a M52 3.0 Stroker and hit 250bhp on the dyno

Re: Turbo M50/52

Re: management... Again