E30 Zone

Having a small sort out, do M30B34 conrods, M30B34 crank and M90 conrods/pistons have any value? If they are worthless junk i'll scrap them.

thanks
JP

Real pleasure doing business with you Magpie, recommend highly. Straightforward, prompt delivery, and just as described (if not better!).
Many thanks, appreciate the great service.

Use an IE type + crank scraper, car used in PBMW and no problems

1125kg PBMW minus 95kg driver and 30kg ballast....1000kg

which one?

m90
m30b34
m30b35

All different, latter two similar internals different outer

Probably have a m90 block spare

JP

...and another here with units from Phil at Power Developments. He has good contacts with people at Bilstein and has units rebuilt as required for your particular application.

rob0r - yes re B6's

Albeit not e30, but a mix of e39 M5 and X5 (for my tow car that tows my e30 :wink: ) 01 Stabilizer, front D=27MM 1-off 31352229080 02 Stabilizer rubber mounting D=27MM 2-off 31352229544 01 Stabilizer, rear D=16,5MM 1-off 33552229136 02 Stabilizer rubber mounting D=16,5MM 2-off 33552229604 07 Rubber ...

A few of us have had a sports exhaust custom made by Klarius Exhausts, to fit the 320. www.klarius.eu/ Doug Bentley (Mobile) 07967645522 If you are intrested in one give Doug Bentley a ring at Klarius. Light weight, with a great sound. And noise tested at 96DB, So okay for trackdays. Ours worked out...

When i put the intermittent mode on i have a high pitched noise coming from the relay - all other functions (fast, normal, once only) work ok. Motor has also been checked and cleaned, appears to be functioning well. My car has had its electrics modified alot (its a race car), and used to have headla...

+2 with modified e36 on pbmw

Great service, very quick turnaround, great comms.

Nice one, thanks.

JP

Rob - thanks for the clarification. Looks like there may well be plenty of people. 1.CHR1S1990 (6 Line) 2. Jozi (6 Line) 3.Duke137 (4 Line) 4.frogisland (6 line) 5. Nine468 (6 Line) 6. N00b (6 line) but I'm hoping to save a little from the £75 inc delivery cost by collecting mine in person 7.brianmo...

Contacted him today, said that no one else had called. Left details, but i will have to pull out if can't get another 5 by the weekend (i'm in a rush for them).

JP

Race car build. New = preventative maintenance, parts will be c20 years old. Have a 15 year old Porsche that i rebuilt, the pipes were corroded on that and the cooler partly damaged, corroded and requiring a good flush.

Have looked into this a bit more, i think it is 3/4 unf.

JP

Can anyone point me in the right direction for the thread size of the oil filter. I putting an aftermarket oil cooler kit on the m20 and would like to know the thread size for the sandwich plate.

thanks

JP

Can you post a photo of the other?

Is it a 4-door? Cannot find the plastic screws in my 2-door - would have posted them to you for nothing if i could have found them (interior removed from one car, the other is being broken for spares fro myself)

JP

Hi, thanks for the replies. Car now started, fuel pump ok, tried the fuel rail feed - ok. Also checked all engine bay connections, removed immobiliser (car is being built into a PBMWC car). Swapped over the crank and cylinder id sensors to my other e30 (spares car but with better engine!) and they w...

M20 engine Fuel/pressure at FPR (disconnected pipe, filled small bowl) Spark at all six plugs. Turns over ok, will not 'catch' Need to check the following (have another e30 turning up tomorrow that i can swap parts over from): Crank sensor Injector connections Immobiliser? Will also check dissy cap ...

Search found 18 matches

M30B34 and M90

Re:

Re:

Re: How heavy is yours?

Re: M30 3.5 block needed asap

Re: Bilstein GrpN

Prices please

Re: PBMW Exhaust

Wiper intermittent mode relay noise

Re: Best adjustable topmounts on a -Â£125 budget?

Re: magpie

Re:

Re:

Re: Oil filter thread size?

Oil filter thread size?

Re: the name of the big plastic screw that holds the carpet

Re: Starting problem - it won't!

Starting problem - it won't!